Transcript
Spokane 4'x8' 96" O.C.* 3" Spacing 4 3.5 1.5 x 5.5 x 95.75 Rail 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * 7/8" x 3" x 42.25" * Post 48 7/8" x 3" x 42.25" * 1.75 x 3.5 x95.75 Rail 33-1/8 5-1/2" 2" 1 Material List Qty Item Dimension Wrhs Use Only 1 Top Rail 1-3/4" x 3-1/2" x 95-3/4" * 1-3/4" x 3-1/2" x 95-3/4" * 1 Bottom Rail 1-1/2" x 5-1/2" x 95-3/4" * 1-1/2" x 5-1/2" x 95-3/4" * 1 Aluminum 1-1/4" x 1-3/4" x 95-3/4" * 1-1/4" x 1-3/4" x 95-3/4" * 15 Pickets 7/8" x 3" x 42.25" * 7/8" x 3" x 47" * 15 Picket Caps 7/8" x 3" 7/8" x 3" * Actual measurement may vary slightly. * Spade picket caps may be substituted with Dog Ear picket caps. * Maximum rise/drop over the length of panel is 12" ( 2" rise per 12" of run ) * The holes on underside of top rail are enlarged to allow panel to rack. * Put a small amount of glue around the inside of the picket before inserting cap. PWPI-3R5.5-4X8
