Download Zanussi 641280 Brochure
Transcript
RANGE COMPOSITION A range of hoods supplementing the ‘inductive emission’ principle and automatic filter washing. Untreated air is introduced inside to partly compensate for that removed. This results in better drawing of fumes towards the filter surface and reduced air-treatment costs. The inside filters have water sprayer nozzles controlled by the special panel which controls washing functions. The range consists of hoods with 8 different lengths (1200, 1600, 2000, 2400, 2800, 3200, 3600 and 4000 mm) and 1500 mm deep. SUPERTREDILWASH - SW line - 1500mm 304 AISI WALL TYPE HOODS ZANUSSI PROF E SSIONA L FUNCTIONAL AND CONSTRUCTION FEATURES Constructed entirely in 304 AISI stainless steel. � � Compensated flow exhaust system (air inlet from outdoors). � Automatic built-in filter-washing. TECHNICAL DATA CHARACTERISTICS External dimensions - mm width depth height Air Capacity - mc/h Inlet Air Capacity - mc/h Net weight - kg. � Supplied with "CHICANE" filter packs in 304 AISI stainless steel with built-in lighting and drain pipe diam.= 1 1/2" in 304 AISI stainless steel. � Brass nozzles with full cone-shaped jets and fast joints in stainless steel complete with gasket and nylon connector. � Water � All parts in contact with the inlet air flow, at external temperature, are insulated to avoid condensation. � Eyebolts and screw anchors for ceiling installation. � Heating and air conditioning costs reduced up to 60%. pipes in 304 AISI stainless steel. MODELS STWP1512 STWP1516 STWP1520 STWP1524 STWP1528 STWP1532 STWP1536 STWP1540 641280 641281 641282 641283 641284 641285 641286 641287 1200 1500 500 2000 1500 96 1600 1500 500 2700 2010 117 2000 1500 500 3300 2220 136 2400 1500 500 4000 2400 160 2800 1500 500 4700 2760 182 3200 1500 500 5300 3180 203 3600 1500 500 6000 3600 225 4000 1500 500 6600 3960 246 641280, 641287, 641286, 641285, 641284, 641283, 641282, 641281 1100/1300/1500 3/4 500 1900 500 1900 100 3/4 20 60 1 1/2 1 1/2 120 20 250 60 40 86 250 60 480 60 1000/1100/1200/1300 60 400/500/600/700 1 1/2 1 1/2 400/500/600/700 2800/3200/3600/4000 480 40 3/4 60 40 1200/1600/2000/2400 3/4 100 120 100 100 1100/1300/1500 20 250 40 86 250 60 LEGEND C - Water drain I - Electrical connection STWP1512 641280 1"1/2 220 V, 1N, 50/60 STWP1516 641281 1"1/2 220 V, 1N, 50/60 STWP1520 641282 1"1/2 220 V, 1N, 50/60 STWP1524 641283 1"1/2 220 V, 1N, 50/60 STWP1528 641284 1"1/2 220 V, 1N, 50/60 STWP1532 641285 1"1/2 220 V, 1N, 50/60 STWP1536 641286 1"1/2 220 V, 1N, 50/60 STWP1540 641287 1"1/2 220 V, 1N, 50/60 OPTIONAL ACCESSORIES ACCESSORIES MODELS STWP1512 STWP1516 STWP1520 STWP1524 STWP1528 STWP1532 STWP1536 STWP1540 641280 641281 641282 641283 641284 641285 641286 641287 EXTRACTION PLENUM FOR HOOD 640138 2400 MM EXTRACTION PLENUM FOR HOOD 640139 2800 MM EXTRACTION PLENUM FOR HOOD 640140 3200 MM EXTRACTION PLENUM FOR HOOD 640141 3600 MM EXTRACTION PLENUM FOR HOOD 640142 4000 MM GALVAN. AIR INLET PLENUM FOR 640374 HOOD 2400MM GALVAN. AIR INLET PLENUM FOR 640375 HOOD 2800MM GALVAN. AIR INLET PLENUM FOR 640376 HOOD 3200MM GALVAN. AIR INLET PLENUM FOR 640377 HOOD 3600MM GALVAN. AIR INLET PLENUM FOR 640378 HOOD 4000MM WASH-UP CONTROL PANEL-1 641141 641141 641141 641141 641141 641141 641141 641141 ZONE 60X20X40 CM WASH-UP CONTROL PANEL-2 641142 641142 641142 641142 641142 641142 641142 641142 ZONES 60X20X40CM WASH-UP CONTROL PANEL-3 641143 641143 641143 641143 641143 641143 641143 641143 ZONES 60X20X40CM WASH-UP CONTROL PANEL-4 641144 641144 641144 641144 641144 641144 641144 641144 ZONES 60X20X40CM ZANUSSI PROF E SSIONA L www.zanussiprofessional.com HGAA2 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.