Transcript
Specification Sheet Fan Master Jr.® Romex Clamp 4" Saf-T-Cap® to protect bolts and wires during painting and sheetrock installation Ideal for New Construction Work Item Number 0252511 Specifications • • • • • • • • • Fits all ceiling fans 13.4 cubic inch wiring capacity 2 - ½" Romex or conduit knockouts Includes 1 integral Romex clamp and 1 plastic Romex connecter Two hour fire rating For fixture support of 150 lbs. or less Acceptable for fan support of 70 lbs. or less Height - 4" Box depth - ½" Romex Connector Mounting hardware Pack Information Ceiling fan or lighting fixture attaches to structure support, not to plastic Clips inside box hold screws during initial installation 5F51 US PATENT NO. 5,762,223 Includes Mounting Hardware and Instructions. Meets or Exceeds UL Standards Regarding Exposed Threads Within Box. Meets or Exceeds NEC® Safety Codes. Romex® is a registered trademark of Southwire Company. Call 1-800-999-2226 or visit www.westinghouselighting.com Westinghouse Lighting Corporation, Philadelphia, PA 19154-1029, U.S.A. Westinghouse Lighting Corporation, a Westinghouse Electric Corporation licensee “Westinghouse” and “You can be sure...if it’s Westinghouse”are all registered trademarks of Westinghouse Electric Corporation ©2011 WESTINGHOUSE LIGHTING CORPORATION / WLC / 0711 / 103900 • Bulk Packed • 12 Per Cut Case