Transcript
ASSEMBLY INSTRUCTIONS FOR 31744 Sleeve wrench Ball stud Socket ring Column Glass Scroll Ball nut Fixture body 1. Before beginning the assembly, carefully unpack and identify all parts referring to the illustration. 2. Unravel the supply power and ground wires and pass the holes of column. Thread the bottom of column into the coupling at the top of fixture body. Hand tightens until snug. 3. Locate the scroll. Attach the scroll to the fixture body and the column with ball nut and ball stud as shown in the illustration. 4. Carefully place the glass over the socket and secure with the socket ring by sleeve wrench as shown in the illustration. Hand tightens until snug. 5. Install proper bulbs (not provided) to the sockets referring to the markings and labels on fixture for maximum wattage. 6. Restore power to the installation point ON. Retain this sheet for future reference. IF IN DOUBT ABOUT ELECTRICAL INSTALLATION, CONSULT A LICENSED ELECTRICIAN! 01.06
