Download TP-Link TL-ANT24PT3 Data Sheet
Transcript
Pigtail Cable TL-ANT24PT3 Features: Easy to install and use Manufactured using 3m Low Loss CFD-200 cable that provides a higher performance cable with excellent flexibility N Male to RP-SMA Female connector, applicable in most of connections between the wireless AP/Router and antenna Description: The TL-ANT24PT3 pigtail cable is ideal for flexible connection between rigid outdoor cable and wireless access points/routers. It is very easy to use, no configuration or installation software required. Specifications: Frequency DC ~ 3GHz Impedance 50Ω Nominal Insertion Loss 2.9 dB VSWR (MAX.) 1.5:1 Max. Connector Type N Male to RP-SMA Female Operating Temp -10℃~+60℃ Storage Temp -40℃~+80℃ www.tp-link.com Pigtail Cable TL-ANT24PT3 Diagram: Outdoor Point to Point Application Simple and Convenient Installation with Excellent Transmission Range N-type Male +N-type 1 Female Building 2 2 N-type Female +N-type 3 Male 4 Access Point + RP-SMA RP-SMA Male Female PC Switch Building 1 1 TL-ANT2424B Antenna 2 TL-ANT24SP Surge Protector 3 TL-ANT24EC6N Extension Cable 4 TL-ANT24PT3 Pigtail Cable Package: - Pigtail Cable TL-ANT24PT3 Copyright © 2011 TP-LINK Technologies Co., Ltd. All rights reserved. Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd. www.tp-link.com