Download Sub-Zero WS-30/O User's Manual
Transcript
30" Wine Storage Better wine storage conditions for the bottle ultimately means better enjoyment in the glass. Model WS-30 is our largest wine storage unit with a capacity of 147 (750 ml) bottles. Two independent storage zones maintain the temperature and humidity that wine — and wine lovers — require. Model WS-30 is available in framed, overlay, flush inset and stainless steel design options. Model WS-30/S/PH shown. FEATURES MODEL OPTIONS • Four design options: framed, overlay, flush inset and stainless steel. Design • Built-in design allows for dual installation with built-in unit. • Full-size wine storage with individual temperature control of two separate compartments. • Maintains ideal storing and serving temperature for all wines, humidity and UV protection. WS-30/O WS-30/S/TH WS-30/S/PH Overlay/Framed/Flush Inset Stainless Stainless Panel Stainless Stainless * Tubular Pro Grille Handle *Handle not included to allow for design flexibility. ACCESSORIES ENEMIES OF WINE • Grilles for 83" or 88" finished height (84" is standard). Heat – Two independent storage zones can be set in a range of 38°F to 65°F, with one-degree digital accuracy. Flush inset and dual flush inset panels in stainless steel with tubular or pro handles. • Temperature zones range from 38°F to 65°F. • • Full-view, UV-resistant glass door—high altitude glass available. • • Illuminated touch control panel. • Side panels in white and stainless steel. • Discreet interior lighting. • Stainless steel kickplate. • Wine shelves accommodate 750 ml bottles, half-bottles and magnums. • Framed grille insert and full-length handles. • Stainless steel tubular and pro handles. • Roller-glide wine shelves with natural cherrywood facing have three-quarter extension for easy access. • UL approved door lock. • 90° door stop. • Illuminated display shelf for prized bottles of wine. Accessories are available through your Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. • Can be connected to home security system. • Star-K compliant with installation of a harness kit. Dual installation kits with and without dual wide grille—84" finished height. Light – UV resistant bronze tinted glass shields wines from harmful rays. Humidity – Dual evaporators, one for each storage zone, maintain steady, moderate humidity. Vibration – Sub-Zero’s quiet compressor lets wines rest undisturbed. Shelves glide out smoothly, providing access without agitating the wine. For additional information on the enemies of wine, visit www.subzerowine.com. INSTALLATION SPECIFICATIONS 30" Wine Storage Location of Electrical Supply Standard Installation OVERALL DIMENSIONS 30" (762) TOP VIEW 24" (610) FRONT VIEW 24" (610) OPENING DEPTH 7" E (178) UNIT WITH 3/4" (19) PANEL 6" (152) 84" 75 1/2" (2134) (1918) FROM FLOOR 73 3/4" (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 83 3/4" (2127) OPENING HEIGHT 24" (610) OPENING DEPTH 23 7/8" (606) 29 1/2" (746) OPENING WIDTH Dimensions in parentheses are in millimeters unless otherwise specified. 23 7/8" (606) 17" (432) 311/4" (796) Unit dimensions may vary by ±1/8" (3). 2 3/8" (60) SIDE VIEW SPECIFICATIONS Overall Dimensions FRONT VIEW Flush Inset Installation 30"W x 84"H x 24"D Door Clearance Wine Storage Capacity 311/4" Standard Flush Inset 31 3/4" 29 1/2" 32" Opening Height Flush Inset Height 83 3/4" Electrical Requirements Shipping Weight TOP VIEW 26 3/16" 24" (610) DEPTH (665) FLUSH TO CLEAT INSET DEPTH 147 bottles* Opening Width Flush Inset Width Opening Depth Flush Inset Depth IMPORTANT NOTE: Dimensions assume a 3/4" (19) panel thickness. 84" 24" 26 3/16" 115 V AC, 60 Hz 15 amp circuit 3 11/4" (32) UNIT WITH 3/4" (19) PANEL CLEAT DETAIL A 2 3/16" 1/4" (6) (56) CLEAT 26 3/16" 24" (610) TOP VIEW OPENING (665) DEPTH FLUSH INSET TO CLEAT DEPTH CLEAT 3" (76) 24" (610) DEPTH TO CLEAT typical 2 3/16" (56) 2 3/16" (56) 26 3/16" (665) FLUSH INSET DEPTH 11/4" (32) 445 lbs Detail A 83 3/4" *750 ml bottles. (2127) HEIGHT TO CLEAT 11/4" 291/2" (746) WIDTH TO CLEAT (32) INSTALLATION NOTES 11/4" (32) 3" typical (76) CLEAT 84" 32" (813) (2134) FLUSH INSET HEIGHT FLUSH INSET WIDTH 4" (102) For overlay models, you will be adding a door panel for a custom look. Overlay models allow you to match surrounding cabinetry hardware, and the panel grille accepts a custom panel insert. 24" (610) OPENING DEPTH TO CLEAT SHADED AREA MUST BE FINISHED 2 3/16" (56) 11/4" (32) Complete installation specifications, including panel sizes, can be found on our website, subzero.com/specs. DETAIL B SIDE VIEW Detail B FRONT VIEW ©Sub-Zero, Inc. all rights reserved. Features and specifications are subject to change at any time without notice. 2/10