Transcript
HN250 Joist Hanger Nailer Fastening Solutions™ A powered collated fastening solution for installing all kinds of metal framing hardware targeting framing contractors, deck builders, and in-plant personnel. Specifications: Item Code: 3Z0001N Weight: 4.8 lbs. (2.18 kg) Length: 12" (304.8 mm) Width: 4" (101.6 mm) Height: 11" (279.4 mm) Magazine Capacity: 30 Operating Pressure: 50-120 psig Fastener Specifications: The HN250 drives 1 ½" & 2 ½" x .131", .148" and .162" shanks; in both bright basic and hot dipped finishes • Standard tensile (NOT heat treated or stiff stock) • Paper tape collated FRH nails • 1 ½" packed 2M per carton; 2 ½" packed 1.5M per carton 11/2 (38.1 mm) 21/2 (63.5 mm) 1 Applications: • • • • • Joist Hangers Foundation Anchors Seismic and Hurricane Straps and Ties Post Caps and Bases Other Metal Framing Hardware Features and Benefits: • Simple and fast operation – saves hours over hand nailing • Small size for access and maneuverability • Lightweight at just 4.8 lbs. - means less fatigue than hand nailing • Nail point protrudes so nails go in the hole every time • Easy rear load magazine with load and cock operation • Durable comfort grip reduces worker fatigue • Belt hook included • Includes case, fitting, wrenches, and oil • 1 year warranty 800-543-4596 www.senco.com ©2005 by Senco Products, Inc.