Transcript
Tubing Cutter Constant Swing Tubing Cutters With X-CEL™ Upgrades RIDGID Model 150 and 150-L Constant Swing Tubing Cutters, including heavy-duty versions, have been upgraded with new X-CEL™ features for enhanced productivity. X-CEL™ Knob = Quicker Cut X-CEL™ Pin = Quicker Wheel Change New Upgrades • New X-CEL™ knob is bigger and more ergonomic, providing a firmer grip to cut tubing more quickly and easily. Spare Wheel Still Included In Knob • New X-CEL™ ball detent wheel pin allows users to change cutter wheels more quickly – No tool needed...No lost clips...change to cut copper or other tubing in seconds! FULL LIFETIME WARRANTY Against Material Defects & Workmanship Model 150 Same Great Basic Design Models 150 and 150-L still provide best-in-class cutting accuracy and cutter wheel life, a constant swing radius design that makes them useful in tight space applications and an enclosed feed screw to prevent clogging or jamming. In addition, a spare cutter wheel is still included in the knob for maximum uptime, and a fold-away reamer is stored in the frame for proper tube preparation. Ordering Information Catalog No. Model No. Description Standard Wheel 31622 31627 66737 66742 150 150 150-L 150-LS Constant Swing Cutter Above w/H-D Wheel(s) Large Capacity Constant Swing Cutter Above w/H-D Wheel(s) E-3469 E-4546 E-3469 E-4546 Capacity O.D. mm in. /8 /8 1 /4 1 /1 1 1 - 11/8 11/8 13/8 13/8 3-28 3-28 3-35 3-28 Weight kg lb. /8 /8 7 /8 7 /8 7 7 0,4 0,4 0,4 0,4 Standard Pack 6 6 6 6 Ridge Tool Company • 400 Clark St., Elyria Ohio 44035-6001 U.S.A. • Visit us on the Internet: www.ridgid.com All sales subject to Ridge Tool Company Terms and Conditions of Sales. 999-997-699.10 Printed in U.S.A. © RTC 7/06 Catalog Sheet No. R-05-G Effective Date: September 1, 2005
