Download Nokia 7380 User Guide

Menu functions
Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth. Select from the
following options:
Active device—to check which Bluetooth connection is currently active. If you
want to close the connection to the selected device, select Disconnect.
Paired devices—to view a list of Bluetooth devices that are currently paired with
the phone. Scroll to the desired device. If you want to delete the pairing to the
device, select Delete.
Select Connect to connect to the selected device, or select Options to access
available functions depending on the status of the device and the Bluetooth
connection. Select Assign short name to give a nickname (visible only to you) to
the selected device. Select Auto-conn., no conf. > Yes if you want the phone to
connect to the selected device automatically, or No if you want the phone to ask
for your permission first. An active Bluetooth connection is indicated by
at
the top of the display.
Bluetooth settings
Select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings to
define how your phone is shown to other Bluetooth devices. Select My phone's
visibility and Shown to all to show the phone to all other Bluetooth devices or
Hidden to show the phone only to the paired devices. If possible use the hidden
mode. Select My phone's name to change your phone Bluetooth device name.
Packet data
GPRS (general packet radio service) is a network service that allows mobile
phones to be used for sending and receiving data over an Internet Protocol (IP)based network. EGPRS (enhanced GPRS) is similar to GPRS, but enables faster
connections. For more information on availability of (E)GPRS and data transfer
speed, subscription, and pricing, contact your service provider. Save the (E)GPRS
settings for each of the applications used over (E)GPRS.
Packet data connection
Select Menu > Settings > Connectivity > Packet data >Packet data conn. and
from the following options:
Always online—to set the phone to automatically register to a packet data
network when you switch the phone on
GPRS and EGPRS are not indicated separately; the indicators for GPRS and EGPRS
are the same.
When needed—to set the (E)GPRS registration and connection to established when
an application using (E)GPRS needs it and closed when you end the application.
35