Transcript
New Holland Crop-Chopper Flail Harvester ® 38 MODEL Width, in transport, ft. in. (m) Width, in operation, ft. in. (m) Height, overall, ft. in. (m) Length, overall, ft. in. (m) Weight, lbs. (kg) Cutting width, in. (m) Cutting height, in. (mm) Rotor speed, rpm Rotor flails Cutterhead knives Cutterhead paddles Cutterhead speed, rpm Number of paddles Adjustable Hitch Drive, rpm Overload Protection Tires 38 9’8” (2.94) 10’10” (3.30) 10’2” (3.09) 10’4” (3.15) 2,020 (898) 72 (1.83m) 2 to 7 (50 to 180) 1,373 40 3 standard Cupped 966 3 2 positions 540 PTO with yoke and safety shield Slip and overrunning clutches and shearbolt 27x7.50-15 Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563). Design, materials and/or specifications are subject to change without notice and without liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may var y outside these areas. © 2008 CNH America LLC New Holland is a registered trademark of CNH America LLC. Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual before using the equipment. Pay close attention to all safety and operating decals and never operate machinery without all shields, protective devices and structures in place. Page 1 of 1
