Download Netgear WNDAP350 User Guide

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
Table 3-2. Statistics Fields
Field
Description
Multicast Packets
The Multicast packets sent and received in 802.11n/g mode since the
WNDAP350 was restarted.
Total Packets
The Wireless packets sent and received in 802.11n/g mode since the
WNDAP350 was restarted.
Total Bytes
The Wireless bytes sent and received in 802.11n/g mode since the
WNDAP350 was restarted.
Wireless 11n/na
Unicast Packets
The Unicast packets sent and received in 802.11n/a mode since the
WNDAP350 was restarted.
Broadcast Packets
The Broadcast packets sent and received in 802.11n/a mode since the
WNDAP350 was restarted.
Multicast Packets
The Multicast packets sent and received in 802.11n/a mode since the
WNDAP350 was restarted.
Total Packets
The Wireless packets sent and received in 802.11n/a mode since the
WNDAP350 was restarted.
Total Bytes
The Wireless bytes sent and received in 802.11n/a mode since the
WNDAP350 was restarted.
Viewing Available Wireless Station Statistics
The Available Wireless Stations List (AWSL) contains a table of all IP devices associated with this
wireless access point in the wireless network defined by the Wireless Network Name (SSID). For
each device, the table shows the MAC address, BSSID, SSID, Channel, Rate, State (whether the
device is allowed to communicate with the wireless access point or not), Type, AID, Mode, and
Status.
Note: A wireless network can include multiple wireless access points, all using the same
network name (SSID). This enables extending the reach of the wireless network
and allows users to roam from one access point to another, providing seamless
network connectivity. Under these circumstances, be aware that only the stations
associated with this access point will be presented in the Available Station List.
3-16
Management
v2.0, April 2013