Download NEC VXi User's Manual

Transcript
Recognizing the Windows NT Power Management States
It is important to recognize your system’s behavior when in each of these power
management states. The following table describes the system behavior for each power
management state.
Windows NT Power Management Behavior
Standby
Suspend (STR)
Save-to-File (STF)
Default
Setting
4 Minutes
10 minutes after Standby
30 minutes after Suspend
Manually
invoke
Fn-F4
Press Power button for less
2
than 4 seconds or
Click Start, Suspend
Fn-Power
System
behavior
LCD panel is blank.
LCD panel is blank.
LCD panel is blank.
Status LED lights
green.
Status LED blinks green.
Status LED turns off.
Progress bar indicates that
current working environment
saved to memory.
Progress bar indicates that
current working environment
saved to hard disk.
Press any key
Press Power button.
Press Power button.
Progress bar appears during
process.
Progress bar appears during
process.
Resume
1
Must configure Suspend Option in BIOS as STF.
Must configure System Switch in BIOS as Sleep button.
3
Automatic STF when there is only 3% power remaining in the system.
2.
3-26
Using the BIOS Setup Utility
1,3
1,2