Download NEC P42XP10-BK User's Manual
Transcript
NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 Contents: Product Description and Notes Tilt Angle and Rotation Ventilation Requirements Display Dimensions Front, Top, Bottom & Right Side Rear Cosmetic Colors Display Dimensions w/Optional Speakers and Stand Optional Stand Dimensions Optional Speaker Dimensions Dimensions w/Optional Wall Mount Connections Control Codes Page 1 Page 1 Page 2 Page 3 Page 4 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Product Description Type: Resolution: Aspect Ratio: Plasma Monitor 1024x768 16:9 Screen Surface: Dimensions: Weight: FCC: Anti-Reflective 40.79”(W) x 25.36”(H) x 5.00”(D) 81.6 lbs Class B Notes This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be a step-by step procedure for installation. Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local building codes. All mounts should make secure contact to wood studs. 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to fill the screen using the menus (see “Aspect Modes” in menus and user manual). Distances are in inches, for millimeters multiply by 25.4. Distances may vary ±5%. Tilt Angle and Rotation Below are the maximum angles that the monitor can be tilted in the landscape position only. Do not install in the portrait position. Landscape 20deg Max. 20 deg www.necdisplay.com P42XP10-BK Page 1 of 10 NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 Ventilation Requirements (all models) Dimensions below are minimum required for proper ventilation. WALL 50mm 2” 0 to 40 degC 32 to 104 degF 50mm 2” 50mm 2” WALL WALL 50mm 2” 50mm 2” NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations. www.necdisplay.com P42XP10-BK Page 2 of 10 NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 Display dimensions 38.27 36.69 34.33 0.12 FILTER PANEL SURFACE 1.62 5.00 3.28 30.31 1.53 0.87 TOP VIEW 37.54 1.62 9.60 25.36 LED IR 11.85 9.40 21.72 20.43 (PANEL DISPLAY AREA) 2.00 1.80 36.28 (PANEL DISPLAY AREA) 1.80 2.80 0.51 19.70 RIGHT SIDE VIEW 40.79 3.23 2.36 0.33 POWER SWITCH 0.47 2.46 0.40 AC IN 18.50 (TERMINAL PANEL) 16.51 www.necdisplay.com 0.88 14.80 BOTTOM VIEW P42XP10-BK Page 3 of 10 NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 Display dimensions (cont.) for PC 4-M4 Depth 10 for MOUNT UNIT 4-M8 Depth 16 700 445 0.70 for SPEAKER 8-M4 11.81 3.58 4.40 0.70 8.24 7.00 0.44 4.02 7.00 Label 0.63 23.78 (STAND) REAR VIEW www.necdisplay.com P42XP10-BK Page 4 of 10 NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 Dimensions with optional speakers and stand 1.54 2.32 5.00 6.83 23.78 0.04 0.04 3.15 14.21 25.36 3.15 2.80 26.50 47.17 www.necdisplay.com 1.50 6.80 P42XP10-BK 16.40 Page 5 of 10 NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 Optional Stand Dimensions (ST-P42P1) 2.80 Table Top Stand ST-P42P1 0.79 9.66 Ø 0.39 13.60 16.4 2.20 0.79 0.08 0.87 1.56 3.00 5.96 9 ° .0 ° +1 0 .7 0° - 1.77 1.77 www.necdisplay.com P42XP10-BK Page 6 of 10 NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 Optional Speaker Dimensions (SP-P42P1) Optional Speakers SP-P42P1 3.15 1.54 0.79 0.79 4-M4 www.necdisplay.com 14.75 25.36 INPUT TERMINAL P42XP10-BK Page 7 of 10 NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 Dimensions with optional Wall Mount Kit (WMK3260-L) Label www.necdisplay.com P42XP10-BK Page 8 of 10 NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 Connections Speaker Terminal Connections Located at bottom of display Control Panel Power Switch www.necdisplay.com P42XP10-BK Page 9 of 10 NEC Display Solutions of America, Inc. P42XP10-BK Installation Guide 42” Plasma Monitor Rev 1.2 Control Codes Function POWER INPUT SWITCH AUDIO MUTE PICTURE MODE SCREEN MODE: AUTO PICTURE FILM MODE Code Data 01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 18 0D 01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 1D 0D 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 31 03 18 0D 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 32 03 1B 0D 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 33 03 1A 0D 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 34 03 1D 0D 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 35 03 1C 0D 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 36 03 1F 0D 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 37 03 1E 0D 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 43 03 6A 0D 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 44 03 6D 0D 01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 31 03 62 0D 01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 30 03 63 0D 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 33 03 6E 0D 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 34 03 69 0D 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 35 03 68 0D 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 42 03 1F 0D 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 43 03 1E 0D 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 31 03 1B 0D 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 32 03 18 0D 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 33 03 19 0D 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 34 03 1E 0D 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 42 03 68 0D 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 43 03 69 0D 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 44 03 6E 0D 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 45 03 6F 0D 01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 31 03 6A 0D 01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 30 03 6B 0D 01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 32 03 1E 0D 01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 31 03 1D 0D ON OFF RGB1 (15pin HD) RGBHV DVI DVD3/HD3 (HDMI) VIDEO1 VIDEO2 S-Video DVD1/HD1 DVD2/HD2 ON OFF BRIGHT STANDARD CINEMA1 CINEMA2 DEFAULT NORMAL FULL ZOOM DYNAMIC 2.35:1 14:9 UNDERSCAN TRUE ON OFF ON OFF NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: Communication: Baud Rate: Data Length: RS-232C Asynchronous 9600 bps 8 bits Parity: None Stop Bit: 1 bit Communication Code: ASCII PC Control Connector (D-Sub 9P) NOTE: If so desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection. These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND). www.necdisplay.com P42XP10-BK Page 10 of 10