Download Miele KWT 1603 Vi Specification Sheet

Fully Integrated
24” Wine Storage System
KWT 1613 Vi / KWT 1603 Vi
8mieleusa.com
Fully Integrated 24” Wine Storage System
KWT 1613 Vi / KWT 1603 Vi
FOR FLUSH INSTALLATION
25" m
84"
in.*
4"
23 3/
24 5/
8"
EPTS
ACC
UNIT STOM
A CU RAME
NT F
R
F O
O
10 1/
4"
4 1/8
"
Location Codes
E - 5 foot - 120 Volt - 15 Amp 3-wire molded plug power
supply connects lower left rear
O - Standard NEMA 5-15 Duplex Outlet - locate less than
9" above finished floor
6 5/8" - 8 1/2"
1 1/8
"
2" - 8 3/8"
E
83 1/2" - 85 3/8"
24"
Notes
• All Installations must be done in accordance with local codes
• Sides of adjoining cabinets should be filled (flush to frame) to
insure proper fit and finish
• For Proud Installation - please adjust accordingly
* Depth assumes a 3/4” panel, please adjust according to
custom panel thickness
KWT 1613 Vi / KWT 1603 Vi
Page 2 of 7
Fully Integrated 24” Wine Storage System
KWT 1613 Vi / KWT 1603 Vi
GLASS DIMENSIONS
Hinge
FRONT VIEW
Hinge
1/2" - 2 3/8"
44 1/2"
65"
19"
Centerline
Notes
• Centerpoint is 45 1/2" with typical 84" installation
KWT 1613 Vi / KWT 1603 Vi
Page 3 of 7
Fully Integrated 24” Wine Storage System
KWT 1613 Vi / KWT 1603 Vi
CUSTOM PANEL INSTALLATIONS
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets.
Panel size is determined in the following manner:
5 7/8" Minimum
Width:
23 3/4" in all cases
Thickness:
Minimum 3/4" outside frame
Panel Height = HOC - TKH
HOC = Total height of cabinet or side panel
TKH = Toe-kick height
HOC
Panel Height
Height: Determined using the following calculation:
Note:
Finish back side of panels to insure appearance
Panel may extend above unit. This is not
considered in height calculation
Maximum panel weight
:
136.7 Pounds
2 1/2 - 3 1/4"
Both Sides
10 1/8" Minimum
TKH
Panel Notes
If the adjoining cabinets are taller than the height of machine (HOM) - the front panel may be extended accordingly.
Simply maintain the toekick height and extend the panel the needed distance.
Adjoining cabinet
Extended Panel
Machine
KWT 1613 Vi / KWT 1603 Vi
Page 4 of 7
Fully Integrated 24” Wine Storage System
KWT 1613 Vi / KWT 1603 Vi
HINGING DETAILS
90° Door
115° Door
Thickness options
Thickness options
0-1/8"
0-1/8"
0-3/4"
1"
1-1/4"
1-1/2"
1-3/4"
0-3/4"
1"
1-1/4"
1-1/2"
1-3/4"
2"
Cabinet Front
Cabinet Front
1"
Fro
nt P
ane
l
0-3/4"
1-1/2"
1-1/4"
1"
1-1/4"
Front Panel
0-3/4"
1-1/2"
Door Swing
Door Swing
11 3/4"
MAX
26 11/16"
7/16"
NOTE: Additional space needed depending on
thickness of front panels and handle used
NOTE: Additional space needed depending on
thickness of front panels and handle used
KWT 1613 Vi / KWT 1603 Vi
Page 5 of 7
Fully Integrated 24” Wine Storage System
KWT 1613 Vi / KWT 1603 Vi
HINGING DETAILS
115° Door
Thickness options
0-1/8"
0-3/4"
1"
1-1/4"
1-1/2"
1-3/4"
Cabinet Front
13/8”(35mm)
11/6” (29.6mm)
17/24” (18mm)
1/4”(6.4mm)
25/8” (67mm)
21/3” (59mm)
21/24”(52mm) 3/4”
1
(44.5mm)
3”(76.2mm)
F
r
o
nt P
ane
l
0-3/4"
1"
1-1/4"
1-1/2"
Door Swing
16 7/8"
MAX
KWT 1613 Vi / KWT 1603 Vi
Page 6 of 7
Fully Integrated 24” Wine Storage System
KWT 1613 Vi / KWT 1603 Vi
HINGING DETAILS FOR INSTALLATION
WITH APPLIANCE/OBJECT ON HINGE
SIDE
90° Door
Thickness options
Thickness o
0-1/8"
7/16”
13/16” (11 mm)
(30mm)
1-1/4"
1-1/2"
1-3/4"
0-3/4"
1"
1-1/4"
1-1/2"
1-3/4"
2"
17/16”
(36.5mm)
111/16”
(43mm)
15/16”
1
(49.2mm)
Cabinet Front
1"
1-1/4"
Front Panel
0-3/4"
Handle or object that is
NOT flush with Cabinet
Front.
1-1/2"
Door Swing
Door Swi
16 7/8
7/16"
38 11/16"
MAX
**When installing hing side next to an appliance or object that is within range of the door panel, limit the
door opening angle to 90O. This is done by installing the banking pin as illustrated.Insert the banking
pin through the holes and drive in with a hammer.
KWT 1613 Vi / KWT 1603 Vi
Page 7 of 7