Download Miele DA 289 Specification Sheet

Product Dimensions
Decorator Wall Hood
DA289-3
E
O
8"
12 5/
9 7/8
"
5 1/4"
37 13/16" - 51 15/16"
Front Perspective
22 3/
16"
4"
35 1/
Location Codes
E - 110 Volt - 15 Amp 3-wire molded plug
power supply connects through top or
rear of chimney.
O - Standard 110 Volt Outlet
Notes
• All installations must be done in
accordance with local codes.
• 6" duct connects to blower system inside
chimney.
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010405
Installation Dimensions
Decorator Wall Hoods
DA289-3
Mounting plate "B"
Ceiling Line
Structural member
Mounting plate "C"
15 3/4 "
Mounting
Holes
Front Perspective
S + 30 7/8 "
Area must be reinforced
with a minimum of
1/2" plywood backing
Center Line
Notes
• Center unit over cooking surface
• Distance "S" is determined by the cooking
surface. Minimum distance "S" is:
- 14 3/8" for all surfaces
• Area behind mounting plates MUST be
reinforced using a minimum of 1/2"
plywood. Reinforcing material should be
affixed to structural wall members
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010405