Download Makita 6910 User's Manual
Transcript
1” IMPACT WRENCH 02-2004 Model 6910 (MJ) Item No. Part No. No. Used 1 2 421120-1 156135-6 1 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 253909-7 231921-7 253182-9 221815-4 256051-3 212063-6 221816-2 325416-1 216010-9 253713-4 333112-7 231211-8 231212-6 253712-6 216002-8 325415-3 211451-4 256040-8 312739-6 212217-2 241613-0 613282-1 1 1 1 1 1 2 2 2 1 2 1 1 1 1 1 32 1 1 2 1 1 1 1 26 265343-9 2 27 28 29 30 31 32 33 413009-7 623252-2 953106-2 654020-2 942151-2 922382-9 156136-4 1 1 4 2 4 4 1 34 35 36 37 38 39 681002-1 911216-1 284016-5 421075-0 211066-7 213051-6 2 2 1 1 1 1 * 2 Model 6910 Description Bumper Hammer Case (Includes Items 53 & 54) Flat Washer 35 Ring Spring 22 (Type 2) * Anvil Flat Washer 36 Internal Gear 82 Pin 10 Needle Bearing 1012 Spur Gear 37 Spindle Steel Ball 10.3 Flat Washer 35 Ring 79 Compression Spring 36 Compression Spring 49 Flat Washer 36 Steel Ball 4.8 Hammer Ball Bearing 6007LLB Pin 5 Bearing Housing Ball Bearing 1511LLB Fan 90 Armature Assy (Includes Items 23, 24, 38 & 39) (+) Hex Bolt M5X80 (With Spring Washer & Glued) Baffle Plate Field (With Items 30 & 52) Rivet 0-5 Garter Spring Spring Washer 6 Hex Socket Head Bolt M6X60 Motor Housing (With Items 55 - 57) Insulation Washer P.H. Screw M5X14 Rear Cover Cushion Ring Ball Bearing 6200LLB Dust Seal 10 Item No. Part No. No. Used Description 40 181047-4 181048-2 2 2 CarbonBrush CB-154 (2pcs/Set) Auto Cut-Off Carbon Brush CB-155 (Optional) 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 60 61 62 100 102 103 110 112 113 114 115 116 643650-4 341367-0 911121-2 682505-8 664820-2 687600-9 911116-5 911106-8 651554-6 312742-7 911146-6 654502-4 213456-0 257536-2 643653-8 913206-0 951104-0 325365-2 231213-4 256710-9 273444-9 923456-9 345097-5 654037-5 652008-6 654510-5 654005-8 943053-5 652012-5 2 2 2 1 1 1 2 1 1 1 2 2 1 1 2 2 1 1 1 1 1 1 1 4 4 2 1 1 1 Brush Holder Cap 6.5-13.5 Brush Holder Cap Cover P.H. Screw M4X14 Cord Guard 10-90 Cord With Plug 3P-14-2.5 Strain Relief P.H. Screw M4X12 P.H. Screw M4X8 Switch Handle Cover P.H. Screw M4X25 Solderless Connector P-2 Oil Seal 35 Sleeve 35 Brush Holder 6.5-13.5 Set Screw M5X8 Spring Pin 4-12 Pin (Type 1) * Spring (Type 1) * Slotted Pin (Type 1) * Grip 37 Cap Square Neck Bolt M8X35 Belt Insulated Eye Terminal FV1.25-M3 P.H. Screw M3.5X7(With Washer) Closed End Connector 5.5-SD Solderless Eye Terminal 2-M4 Toothed Lock Washer 4 P.H. Screw M4X8 Side Handle Assy (Includes 100, 102 & 103) Extension Bar 25.4 (Type 2) (Old 785209-2) Hex Wrench 5 Metal Carrying Case Accessories A01 123018-5 1 A02 134870-6 1 A03 A04 783203-8 182363-7 1 1 SERVICE CHANGES 1. Change on Anvil. Item No. Description Type 1 Type 2 ----- 231921-7 (Added) 4 Ring Spring 22 5 Anvil 325414-5 (No Longer Available) 325587-4 60 Pin 325365-2 (No Longer Available) (Discontinued) 61 Spring 231213-4 (No Longer Available) (Discontinued) 62 Slotting Pin 256710-9 (No Longer Available) (Discontinued) Above parts are completely interchangeable as a set. When replacing Type 1 Anvil, replace it with complete set of Type 2 parts. 3 Model 6910