Transcript
Calculite® Decorative Architectural Designs Page 1 of 1 6" & 7" Aperture Decorative Perforated Metal Disc 5 7 Frame-In Kit 6 Trimless Reflector 2 C E B A 4 1 D 3 Perforated Metal Disc Complete Fixture consists of decorative element, standard Frame-In Kit and Trimless Reflector. Select each separately. Ordering Information Decorative Element Catalog No. DP6 WH DP6 SA DP7 WH DP7 SA DP A B Dimensions C D E For use with all Calculite 6” Compact Fluorescent and Incandescent open downlight Frame-In Kits except ProSpec.® 10 5/8” 4 1/8” 1 7/8” 3/16” 1 1/16” For use with all Calculite 7” Compact Fluorescent and Incandescent open downlight Frame-In Kits except ProSpec.® 12” 5 1/2” 1 7/8” 3/16” 1 1/16” Finish/Color Trimless Reflector Frame-In Kit White with white inner and outer rubber edging. Satin aluminum with black inner and outer rubber edging. For use with all Calculite 6” Compact Fluorescent and Incandescent open trimless downlight reflectors except ProSpec.® White with white inner and outer rubber edging. Satin aluminum with black inner and outer rubber edging. For use with all Calculite 7” Compact Fluorescent and Incandescent open trimless downlight reflectors except ProSpec.® Features Finishes/Color 1. Decor Ring: Perforated aluminum disc 1/16” thick. 2. Spacer: Aluminum with matte white finish for use with white disc, brushed aluminum for use with the satin aluminum disc. 3. Decorative Knob: Four placed 90° apart, matte white finish for use with matte white disc, brushed aluminum finish for use with satin aluminum disc. 4. Trim Ring: .090” thick aluminum ring with matte white finish. 5. Reflector: See reflector trim for Specification Sheet. 6. Frame-In Kit: See Frame-In Kit for Specification Sheet. 7. Mounting Frame Stud: Four #8-32 screws. Powder coated white disc, spacer and knob with white inner and outer rubber edging. Satin aluminum disc, spacer and knob with black inner and outer rubber edging. Labels U.L. (Damp Location) Job Information Lighting Data Job Name: See applicable downlight Specification Sheet for base lighting data. Multiply the candlepower values or the coefficient of utilization by the following factors: 6” 7” Cat. No.: A Lamp downlights Compact Fluorescent lamp downlights PAR Lamp downlights .70 .65 .85 .70 .75 .85 Type: Lamp(s): Notes: Mechanical Decorative elements securely fastened to four mounting frame studs. Lightolier a Genlyte Thomas Company www.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
