Transcript
22-6011, 22-6013 Page 1 of 1 KENMORE FEATURES Type of Feed Motor — H.P. Quiet 1,725 RPM Induction Motor — Type On / Off Location Stopper Corrosion Resistant Grinding Chamber Shredder Ring / Shredder Plate 22-6011 22-6013 † Continuous 1/2 Split-Phase Wall Black Plastic Galvanized Steel Stainless Steel Jam Resistant 360 Degree Impellers • Push Button Overload Protector • Dishwasher Inlet • Lifetime Lubricated Bearings • Quick Lock® Mount Power Requirements: Volts / Hz / Amps Self-Service Wrenchette Shipping Weight (Approx. Lbs.) • 120 / 60 / 6.3 • 14 ACCESSORIES Kenmore Disposer 22-6011 • Continuous feed • 1 /2 H.P. induction motor Optional Stopper – Stainless 22-60681 Optional 3 ft. Cord 22-60686 Self Service Disposer Wrench 22-60680 Sound Baffle 22-60683 Dishwasher Connector Kit 22-60684 Mounting Assembly 22-60693 WARRANTY • Full one year warranty 1-Year Limited Warranty – Entire Appliance 22-6013 Parts & Labor If used for other than private family purposes, warranty applies for only 90 days. †3 ft. cord included Same as 22-6011 with 3-foot cord included. EASY TO INSTALL Simply turn and lock disposer to the sink flange. Swivel for alignment with plumbing and electrical lines. DISHWASHER DRAIN CONNECTION D* A E** CL Dimensions, Inches 22-6011 22-6013 † A B C D* E** 12 5/8 6 3/8 5 6 4 †3 ft. cord included. *Distance from bottom of sink to center line of outlet. Add 1/2" when stainless steel sinks are used. **Length of tailpipe from center line of outlet to end of tailpipe. C B NOTE: Plumb waste line to prevent standing water in disposer motor housing. Continuous feed models require a separate wall switch. 00211 22-6011.PDF Due to Sears policy of continuous improvement on its products, Sears reserves the right to change materials and specifications without notice. Before installing, consult installation instructions packed with product for current dimensional and installation data. Effective 01/10/11 Rev. 2
