Download Jet Tools JJ-8HH User's Manual

8" HH JOINTER
This 8" jointer boasts a full 2HP motor and a helical style cutterhead. The indexable carbide inserts make blade changes easier than ever before and provide unmatched surface
finish; and a much quieter cut. Extra long cast iron beds allow for more accurate flat
edges and faces on your material. The paddle style power switch can be mounted either
below or above the infeed table.
Helical head with indexable
carbide inserts makes better
finish cuts in material.
Stock No. 900452
10m 07/07
©2007 WMH TOOL GROUP, Inc. All Rights Reserved.
jettools.com
8" HH JOINTER
Center-Mounted Fence
with Positive Stops
High Mount Paddle
Style On/Off Switch
Helical Cutter Head
Table Adjustment
Handwheel
4" Dust Port
and Hood
Heavy-Duty
One-Piece
Steel Stand
8" JOINTER
WITH HELICAL HEAD
STOCK NUMBER
708468K
Model Number
JJ-8HH
Net Weight (lbs.):
398
• Helical cutterhead with indexable carbide inserts for a superior finish and
quieter cut.
Cutting Capacity (W x D/in.):
8 x 1/2
Cutterhead Speed (RPM):
5700
• Heavy-duty cast iron infeed and outfeed tables with precision machined finish
Number of Knives
(Helical/Standard):
36 carbide inserts
Table Height (in.):
31-1/4
• Large, heavy-duty table adjustment handwheel has a locking knob for
quick, easy and secure table height corrections
Table Size (L x W/in.):
66-1/2 x 9
• Built-in dust chute with 4" port connects to your collection system for
efficient dust/chip disposal
Fence Size (L x H/in.):
38-1/2 x 4
Fence Tilts (deg.):
45 R, 45 L
• Center fence controls are conveniently mounted to allow quick
adjustments
Fence Positive Stops (deg.):
45, 90
Dust Port Diameter (OD/in.):
4
• Powerful 2HP motor easily handles the toughest jointing tasks
Dust Collection Minimum CFM
Required:
350
Motor Amps:
12
Motor HP:
2HP
Motor Phase:
1Ph
Motor Voltage:
230V
• Two-way tilting fence with positive stops at 45° and 90° to handle bevel
operations
• Paddle style on/off switch can be mounted above or below infeed table
depending on users preference
Helical head with indexable
carbide inserts makes better
finish cuts in material.
jettools.com