Transcript
THE WOODWORKERS CHOICE FOR PRECISION TOOLS •• E F D HEAVY-DUTY B3NCH™ 10" JOBSITE TABLE SAW C If you're looking for a jobsite saw that's both powerful and portable, look no further than the all-new JET® B3NCH 10" Jobsite Table Saw w/stand. This table saw features a 15 AMP soft start motor, 25" right rip capacity, a riving knife and anti-kickback pawls for added safety, and a heavy-duty folding stand with wheels for quick setup and portability. Weighing in at just under 100lbs, this powerhouse brings the stability of a stationary table saw to your jobsite, then rolls away when you're done. a.Easy folding stand b.Large telescoping extension wing c.Aluminum extruded rails d.Quick-lock fence e.Rear extension B A BC f. New riving knife system F a. Large aluminum extruded fence c. Planing and joining tables lock e. Oversized, ergonomic knobs b. Sheet metal outfeed table with Features height adjustment d. Precision ground table top f. Integrated cord wrap Features PORTABLE •• ■ Easy folding stand for convenient storage, quick setup and portability on the jobsite •• ■ Rubber hand grips on each end of the table allow you to conveniently carry without stand PORTABLE •••■■C jointer planer provides a 2 inon1 the machine Uombination nique base benchtop design allows for&adequate tool storage jobsiteto maximize workspace Compact benchtop design fits conveniently in smallshop environments POWERFUL •• ■ •• ■■Integrated cord wrap •• Heavy-Duty 15 Amp •• ■ Large telescoping extension wing provides a wide 25" ripping capacity Heavy-Duty 13 Amp motor for various cutting applications PRECISE •• ■ Two high speed steel knives for precise, smooth cuts •• ■ Aluminum extruded rails ensure a square fence and sliding precision •• ■ Oversized, ergonomic knobs provide ease of use andmaximum control •• ■ Rear extension provides outfeed support and keeps the workpiece flat •• ■ reduce snipe •• ■ Planing and joining tables lock to ensure precision cutting •• ■ Precision machined table top ensures a smooth, straight cut 707400 707000 JJP-8BT 120V, 60Hz, 13Amp JBTS-10MJS Cutting Thickness (in.) Dust Port Diameter (in.) 2-1/2.20 - 4.92 Net Wt.Jointer / Gross Wt.Size (lbs.)(LxW/in.) 90.39 / 104.72 Table 29 x 8-1/4 New riving knife system complies with UL standards and prevents kickback PRECISE •• ■ Convenient push button arbor lock allows for easy and quick blade change •• ■ Large aluminum extruded fence makes joining stable and precise •• ■ Quick-lock fence slides smoothly and locks securely for accurate cuts •• ■ Sheet metal outfeed table with height adjustment supports long workpieces and Stock Number Model Number Stock Number Model Number Motor Knife Size (in.)15 A, 120 8.25 x .65 Motor V, 60 Hz x .06 Ripping Capacity (in.) (RPM) 25 right 2 Number of Knives Blade Speed (RPM) 4,000 9,000 Cutting Speed Table Dimensions (LxW/in.) Cuts Per Minute CPM 24 x 21-25/32 18,000 Table Dimensions with Extension (LxW/in.) 30-1/4 x 21-25/32 Feed Speed FPM 19.5 Max. Cut Depth @ 90° (in.) 3-1/8 Max. Cutting Width (in.) 8 Max. Cut Depth @ 45° (in.) 2-1/2 Jointer Max. Cut Depth (in.) 1/8 Arbor Diameter (in.) 5/8 Planer Max. Cut Depth (in.) .08 Blade Type (in.) 10– 40T carbide tipped makes transporting motor with soft start easy and ensures workshop safety POWERFUL •• ■ Unique dust shroud design enhances dust and chip removal •• ■ Specifications Specifications helps Planer Table Size (LxW/in.) 10-5/8 x 8-1/2 Planer Table with Out feed (LxW/in.) 17-3/4 x 8-1/2 Fence Size (LxW/in.) Fence Tilt (deg.) Gross Wt. / Net Wt. (lbs.) 4-1/8 x 21 0-45 68.3 / 58.4 jettools.com/b3nch
