Download Jasco 11152 Instruction Manual
Transcript
11152 Color-Changing LCD Night Light Time, Temperature, Date & Day LED background lighting functions LIGHT SET - + MODE Day Year Month Date LIGHT SET + - MODE IMPORTANT: Remove cling sticker over the clock face before use. Please note before starting: Open the battery compartment on the back of the LCD clock as shown. Open Open Close Close Use a coin to open or close the battery compartment Insert the two included LR44 batteries and wait for three seconds, the LCD clock screen will come on. Note: If 5 seconds elapse while in the set mode & no button is pushed, it will revert back to the run mode. Refresh/Change batteries if LCD display becomes faint or blank. LIGHT - + How to set: Hour / Minute / Month / Date / Year/ Temp. SET MODE To start: Insert 2 LR44 button cel The clock will automatic Hour Press and hold until+hour flashes. the flashing setting, if Press + or – to adjust the In hour. to go Press + to the-next setting. LIGHT LIGHT Press MODE for setting + + SET SET SET MODE SET MODE MODE MODE Minute Press Till is flashes Press + or – adjusts the Press SET to go to the n Minute will start flashing. Press + or – to adjust theHour minute. will flash + to the-next setting. to go Press SET + - - MODE LIGHT - MODE - MODE SET + SET + LIGHT LIGHT MODE SET + + - MODE Press + or – adjusts the Press SET to go to the n LIGHT SET LIGHT MODE Temperature To start: will flash Insert 2 LR44 button cel Press + or – adjusts the The clock will automatic Press SET to end the set Month In the flashing setting, i LIGHT + will start flashing. LIGHT MODE for setting + or – to adjust thePress month. Press + to go Press + to the-next setting. SET SET MODE MODE SET LIGHT LIGHT + - SET + - MODE MODE MODE Minute Press Till is flashes Press + or – adjusts the Press SET to go to the n LIGHT SET + - MODE Hour will flash LIGHT LIGHT SET SET + + - MODE MODE LIGHT SET - + MODE Date SET will start flashing. LIGHT Press + or – to adjust the date Press to go + to the-next setting + LIGHT SET LIGHT LIGHT LIGHT SET SET SET - + SET + -+ LIGHT + - MODE MODE SET MODE MODE MODE MODE - + MODE LIGHT SET + - Year To start: Insert 2 LR44 button The clock will autom MODE will start flashing. Press + or –LIGHT to adjust the date. Press In the to flashing + settin go to the next setting SET LIGHT SET + SET - SET SET SET LIGHT + LIGHT SET +LIGHTMODE + - MODE MODE Press MODE for sett MODE LIGHT + + - MODE MODE Minute Press Till is flas Press + or – adjusts Press SET to go to th Temperature LIGHT SET - + MODE SET SET LIGHT SET + - Hour will start flashing. will flash Press + or – to adjust the temp : Press + or – adjusts t LIGHT + Press -SET to go to th + ºC or -ºF. Press to end + the-settings MODE MODE MODE Temperature will flash Press + or – adjusts t Press SET to end the How to set the color cycling mode: NOTE: Background lighting only works when the night light / clock is plugged into a live outlet and is in a dark room. If night light loses power, color selection will revert back to color cycling mode. To change light from color cycling mode to a set color, simply press and release the center of LIGHT button until desired color appears. LED background lighting functions LIGHT SET + - MODE Press and release the center of the LIGHT button to turn light off or return to color cycling mode. SET Using the mode to alternate date and time + Pressing -the button sets the night light to alternate between the time and date displayed. + Press - the button again, and time is continously displayed. MODE MODE CAUTION BATTERIES MAY LEAK HARMFUL LIQUIDS OR IGNITABLE MATERIALS OR EXPLODE CAUSING INJURY AND PRODUCT DAMAGE. • DO NOT MIX OLD AND NEW OR OTHER BATTERY TYPES. • REPLACE ALL BATTERIES AT THE SAME TIME. • REPLACE OR REMOVE FULLY DISCHARGED BATTERIES IMMEDIATELY. • REMOVE BATTERIES BEFORE STORING THE NIGHT LIGHT FOR EXTENDED PERIODS. GE is a registered trademark of General Electric Company and is used under license to Jasco Products Company LLC, 10 E Memorial Rd., Oklahoma City, Oklahoma 73114 www.jascoproducts.com Made in China / Hecho en China 11152-1 01-16-12 Version 3