Download Jacuzzi Capella EM90 User's Manual
Transcript
capella™ plus whirlpool bath like the fabled irish tower of kings that shares its name, the Capella™ whirlpool bath is itself a singularly regal experience in an everyday world. Cozy up to the Capella™ plus whirlpool bath‘s corner configuration and linger as four TheraPro™ jets, four directionally adjustable back jets and one indulgent foot jet massage away the cares of the day. Simple styling makes Capella™ simply appropriate for most any décor—and simply stunning in modern contemporary homes. Available with and without an integral skirt and as a soaking tub for added versatility. Capella™ Plus whirlpool bath features: # of Jets/type of Jets: 4 TheraPro™ Jets, 4 AccuPro™ Back Jets,1 AccuPro™ Foot Jet • • • • • • • • • 4 fully adjustable TheraPro™ jets with a maximum flow rate of 30 GPM per jet 4 directionally adjustable AccuPro™ back jets 1 directionally adjustable AccuPro™ foot jet Energy-efficient, self-draining pump Patented Silent Air™ induction system Slip-resistant bottom Exclusive Tru-Level™ self-leveling base system RapidHeat™ heater standard Electronic on/off control with temperature readout • Chromatherapy underwater lighting • PrO3™ Ozone Sanitation System standard Detail: The Capella™ Plus whirlpool bath places Jacuzzi‘s Magic Touch® controls right in reach. Perfectly positioned AccuPro™ jets massage away cares as you recline against Capella‘s backrest. model number: EM90 exterior dimensions: 60" long x 60" wide x 20½" high interior dimensions (at bottom): 50" long x 34" wide operating gallons: 83 gallons Capella™ Plus Whirlpool Bath Model: EM90, EN00 Ordering Information Installation Notes Product Code: Refer to installation instructions included with fixture before beginning installation. Please confirm product availability and specifications before commencing with any installation work. EM90 Capella™ Plus Whirlpool Bath Right Hand EN00 Capella™ Plus Whirlpool Bath Left Hand PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE. • Center Drain Location Technical Specifications • Accessories / Hardware: Trip-Lever Drain Kit #X559 Rotary Drain Kit, 26” Cable #8730 HTC Jet Trim Kit: #D095 BMH Jet Trim Kit (3 Req’d): #J869 • Trim Kit Finishes Available: (827) – Chrome (898) – Brushed Chrome (815) – Satin Nickel (829) – Bright Brass (805) – Platinum (826) – Brushed Nickel (845) – Oil Rubbed Bronze Dimensions 60” L x 60” L x 20-1/2” H (1524 mm) L x (1524 mm) L x (521 mm) H Drain/Overflow A: 18” (457 mm) B: 12-1/8” (308 mm) Cutout See Illustrations Below Total Weight 1177 lb (535 kg) / 47.8 lb/ft2 (233 kg/m2) Operating Gallonage MIN: 55 U.S. gal (208 liters) MAX: 90 U.S. gal (341 liters) Product Weight 130 lb (59 kg) Opt. Service Access Skirt Mounting 33-1/2" Optional 60" Electrical Specifications 60" Requires a dedicated GFCI protected separate circuit. Motor/Pump: 120 VAC, 15 AMP, 60 Hz. RapidHeat™: 120 VAC, 15 AMP, 60 Hz. Motor Heater Service Access Heater (Standard) 14" X 4" Requires a dedicated GFCI protected separate circuit. RapidHeat™: P/N S750000 27" 27" 34-15/16" 6" 46-5/8" 43-1/8" 58" (1473 mm) 59-1/8" (1502 mm) Ref. Motor Heater 58" (1473 mm) 58" (1473 mm) 59-1/8" (1502 mm) Ref. Drain Cutout Motor 58" (1473 mm) Heater Drain Cutout CAPELLA™ 60 PLUS , Left Hand Product Shown: Capella™ Left Hand Motor Plus Whirlpool Bath LH Model: EN00 * Measurements inside unit represent cutout in floor to allow for drain/overflow. Minimum Service Access dimensions given. 25-5/8" (651 mm) 25-5/8" (651 mm) 25-5/8" (651 mm) 45-3/7" (1162 mm) CAPELLA™ 60 PLUS, Right Hand CAPELLA™ 60 PLUS, Left Hand CUTOUT CUTOUT (Motor) H 2” (50,8 mm) A (Suction Heater) SIDE VIEW END VIEW CAPELLA™ PLUS LEFT HAND MOTOR #BW07 01/07 25-5/8" (651 mm) 45-3/7" (1162 mm) B DRAIN/OVERFLOW © Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com