Download Harman Kardon HK 670 User's Manual

high-current capability
ultrawide bandwidth
phono input
A/B speaker selection
digital loop through
STEREO INTEGRATED AMPLIFIER
This is the one to beat in the two-channel amp arena. To provide the distinctive, dynamic, lively sound quality that made
Harman Kardon a legend, the HK 670 is endowed with high-current capability, achieved through very impressive current
storage capacity. The significance of the ability to deliver 2 x 75-watt of serious power into virtually any loudspeaker load
will be clear the first time your speakers are connected. While others offer inflated specifications, the HK 670
delivers performance.
HK 670
Specifications
• Continuous Average Power (FTC): 75 watts x 2 @ 8
ohms (20Hz – 20kHz, <0.09% THD, both channels
driven); High-Current Capability: ±75 amps
• General – Dimensions (H x W x D): 110mm x 441m x
389mm; Weight: 12.6kg
[NOTE: Depth measurement includes knobs, buttons
and terminal connections; height measurement
includes feet and chassis.]
Features
• 75W x 2 Into 8 Ohms, 20Hz – 20kHz at <0.09%
THD, Both Channels Driven Simultaneously
• High-Current (±75 Amps) Capability Amplifier
• Ultrawide-Bandwidth Amplifier Design
• Five Audio Inputs
• High-Quality Phono Input
• Digital Loop Through for Easy Digital Recordings
• Tape Monitor Loop
• Remote A/B Speaker Switching
• IR Remote Extension Jacks
• Harman Kardon System Remote
All features and specifications are subject to change
without notice.
Harman Kardon is a registered trademark,
and Power for the Digital Revolution is a trademark,
of Harman Kardon, Inc.
high-current capability
ultrawide bandwidth
phono input
A/B speaker selection
digital loop through