Download Haier HW801286 User's Manual

Automatic Drum Washing Machine
USER MANUAL
HW70-I1286
HW80-I1486
Heavy
Wash
Temp.
Rinse
Speed
Spin
Strong wash
Auto
Delay
Pre-wash
Soak
Silk
Delicate
Sport wash
Wool
Silent
Synthetic
Quick
Memory
Spin
Cotton
Start / Pause
Press and hold 2seconds
to set door unlocked
Self-clean
Power
03 - 09
Table of contents
Before use
10 - 15
using the appliance
>COMPONENTS................................ 03
>Preparation................................. 04
>Safety instructions. .................. 05
>Installation. ............................... 06
>Control Panel............................. 08
16- 20
maintenance
>Program selection. .................... 10 >Display codes.............................. 18
>Consumption and technical data... 11 >Troubleshooting........................ 19
>Washing methods....................... 12 >Wiring circuit..............................20
>Cleaning & care.......................... 16
legend
Yes
No
Optional
For your safety, any instructions in this manual with this "Warning" sign must be followed strictly.
Before use
COMPONENTS
03
Thanks for purchasing a Haier product
Please read these instructions carefully before using this appliance. The instructions contain important information which will help you
get the best out of the appliance and ensure safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the
new owner can become familiar with the appliance and safety warnings.
Accessories
Check the accessories and literature
in accordance with this list:
1x Drain hose bracket
1x Inlet hose assembly
AUTOMATIC DRUM WASHING MACHINE
64&3."/6")8#
)8#
)8#
)8#
1x User manual
4x Blanking plugs
Heavy
Wash
Temp.
Rinse
Speed
Spin
Strong wash
Auto
Delay
Pre-wash
Soak
Silk
Delicate
Sport wash
Wool
Silent
Synthetic
Quick
Memory
Spin
Cotton
Power
Self-clean
Start / Pause
Press and hold 2seconds
to set door unlocked
WARRANTY CARD
(Customer’s Copy)
www.haier-mal.com
1x Warranty card
(THIS PORTION TO BE COMPLETED BY OWNER)
PRODUCT:
MODEL:
No:
SERIAL NO:
CUSTOMER’S NAME (IN BLOCK)
MR / MRS / MISS
CUSTOMER’S ADDRESS (IN BLOCK)
TEL: (H)
(O)
DEALER’S NAME & ADDRESS (CHOP)
DATE OF PURCHASE
DATE
MTH
YEAR
HAIER ELECTRICAL APPLIANCES (MALAYSIA) SDN. BHD. (594702-A)
No: 1, Jalan Industri PBP 3, Perindustrian Pusat Bandar Puchong, 47100 Puchong, Selangor.
Tel : 603-5882 2888 Fax : 603-5882 4003 603-5882 4377 (Service) 603-5882 4462 (Sales)
Branches
PENANG
No. 38, Grd Floor, Jln Perusahaan Jelutong 2 Georgetown, 11600 Pulau Pinang. Tel : 604-288 8500/8501 Fax : 604-288 8502
JOHOR BAHRU No. 58, Grd Floor, Jln Rosmarah 2/17, Tmn Johor Jaya, 81100 Johor Bahru, Johor. Tel : 607-353 5669 Service: 607-353 5680 Fax : 607-353 5787
KUANTAN
No. 122, 1st Floor, Jln Haji Ahmad, 25300 Kuantan, Pahang Darul Makmur. Tel : 609 - 514 6166 Fax : 609 - 514 5166
IPOH
No. 21, Jln Medan Ipoh 10, Bandar Baru Medan, 31400 Ipoh. Tel : 605 - 547 7897 Fax : 605 - 547 4739
REMINDER :- This Service Warranty is valuable. Preserved it carefully so that you can present it to your Authorized Haier Distributor
HAIER ELECTRICAL APPLIANCES (MALAYSIA) SDN. BHD. whenever you have occasion to request the warranty service authorized herein
04
Before use
Preparation
Preparing The machine
Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon
opening the package, water drops may be seen on the plastic bag and the porthole. This is normal
phenomenon resulting from water tests in the factory.
Description
This diagram may be slightly different from the layout of the washing machine you have just
purchased due to technical improvements.
Drain hose
Control panel
Power
Work top
Washer door
Door handle
Detergent distribution drawer
Water inlet valve
Power cord
Back cover screws
Back cover
Filter cover
Transportation bolts
Heavy
Delicate
Wash
Temp.
Silk
Wool
Silent
Rinse
Speed
Synthetic
Quick
Memory
Spin
Spin
Strong wash
Auto
Delay
Pre-wash
Soak
Cotton
Sport wash
Power
Self-clean
Start / Pause
Press and hold 2seconds
to set door unlocked
T3
T4
S1
S4
S2
T2
T1
S3
Before use
Safety instructions
05
Before switching the appliance on for the first time
DO ...
... Make sure that the transport bolt are removed.
... Use a separate earthed socket for the power supply.
... Make sure that the plug is accessible.
... Hold the plug and not the electric cable when
unplugging the power supply.
... Make sure that the fuses in the power circuit are rated
for 15A.
... Keep away from heat sources and direct sun light to
prevent plastic and rubber components from aging.
... Make sure that the power cord is not caught under or
in the appliance and avoid damage to the power cable.
... Check that hose joints and connections are firm and no
water can leak. If joints are loose or there is leakage, turn off the
water supply and refix. Do not use the washing machine until the
hoses are properly fixed.
DO NOT ...
... Touch or use the appliance when barefoot or with wet or
damp hands or feet.
... Use flammable detergent or dry cleaning agent.
... Use any flammable sprays in close vicinity to the
appliance.
... Remove or insert the plug in the presence of flammable
gas.
... Allow children or infirm persons to play with the appliance
or packing materials.
... Install the appliance outdoors in a damp place, or in an
area which may be prone to water leaks such as under or near a
sink unit. In the event of a water leak allow the machine to dry
naturally.
... Place the washing machine directly on a carpet, or close
to a wall or furniture.
During Daily use of the appliance
DO ...
... Pull up zips and fix loose threads to prevent the items
from being entangled. If necessary, put small items into a net bag
or pillow.
... Turn off the machine after each wash program and
switch it off at the mains to save electricity and for safety. Wipe
clean the lower part of the porthole.
... Keep the door slightly open when the washing machine
is not in use to prevent formation of odours.
... Let the power cord be replaced by the manufacturer, his
service agent or other accordingly qualified persons, in case it is
damaged.
... Ensure that the appliance is not used by persons
with reduced physical, sensory or mental capabilities, lack of
experience and knowledge without supervision or instruction by a
person responsible for their safety.
... Supervise children to ensure that they do not play with
the appliance.
DO NOT ...
... Touch the washer door during the washing process - it
gets hot!
...Place heavy objects or sources of heat or damp on top
of the appliance.
... Hot wash foam rubber or sponge-like materials.
... Open the detergent distribution drawer during the wash
cycle.
... Force the washer door open. The door is fitted with a
self-lock device and will open shortly after the washing procedure
is ended.
... Open the washer door if the water level is visibly over
the porthole.
... Cover the washing machine with plastic cover so that
inside dampness cannot be kept in.
06
Installation
Before use
Dismantle the Transportation bolts
The transportation bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
1. Remove the back cover.
2. Remove the four bolts on the rear side and take out the synthetic
stabilisers from within the machine.
3. Replace the back cover.
4. Fill the holes left by the bolts with blanking plugs.
Note:
1.When you replace the back cover,the convexity must face
to outside, and you have to insert the back cover from the
two gaps as shown in fig.5.
2.Keep the transportation bolts and synthetic stabilisers
in a safe place for later use.
Adjusting the washing machine
1.
2.
3.
4.
5.
There are adjustable feet under the bottom of the washing machine. Before use, they should be
adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will also
reduce wear and tear. We recommend using a spirit level to level the appliance.The floor should be as
stable and flat as possible.
07
Before use
Inlet Hose
1. Connect the nut on the inlet hose to the connector on the water
valve.
2. Apply inlet hose to a water tap with cold, fresh water.
Note: Use the hose-set supplied with the appliance. Old
hose-sets should not be reused.
1.
2.
1. Use the drain hose bracket to keep the end of the drain hose retained
and prevent the outflow of water. Don't extend the length of the drain
hose; if an extended hose is required, please consult a serviceman.
8 0 - 1 0 0cm
Drain hose
1.
2. The height of the drainage outlet must be 80-100 cm. Fix the drain
hose to the clip at the back of the washing machine to prevent it from
dropping off.
2.
Note: The drain hose should not be submerged in water
and should be securely fixed and leak-free. If the drain hose is placed on the ground or if the pipe is at a
height of less than 80cm, the washing machine will continuously drain while being filled (self-siphoning).
Connecting to the power supply
Before connecting to the power supply, check:
¬ The socket is adequate for the maximum power of the washing machine
(For safety, fuses in the power circuit should be rated for no less than 15A).
¬ The voltage should meet the requirement.
¬ The power outlet should be capable of accepting the washing machine plug.
¬ Connect the machine to an earthed socket outlet.
08
Control Panel
Before use
J
IHG
EDC
F
A
B
Heavy
Wash
Temp.
Rinse
Speed
Spin
Auto
Strong wash
Delay
Pre-wash
Soak
Delicate
Silk
Sport wash
Wool
Silent
Synthetic
Quick
Memory
Spin
Power
Self-clean
Cotton
Start/Pause
Press and hold 2seconds
to set door unlocked
K
L M N
O
Power Switch
F
B
Program knob
G
Washing time
C
Auto button
H
Times of rinse
D
Spinning Speed Setting button
I
Spinning time
E
Washing temperature button
J
Detergent distribution drawer
A
Display screen
K
L
M
N
O
Strong washing button
Delay Button
Pre-wash button
Soak button
Start/Pause button
OPERATIONAL FUNCTIONS
A
B
C
¬ Power
Switch
¬ Program
knob
¬Auto button
D
¬ Spinning
Speed Setting Button
E
¬ Washing
temperature
button
_ Press this button to switch on the washing machine. Press it again to switch it off.Press On/Off button gently for
2 seconds to switch off the machine as buttons are soft touch sensitive.
_By turning the knob clockwise/counterclockwise, the required program can be selected. There are 12 programs
available. After a program is selected, the corresponding light will go on.
The machine has automatic weighing function. Press the "Power" button to get the power on, then the door will
automatically pop open, so put clothes in, close the door, and the display screen will be ready. Press the "Start /
Pause" button, about 2 minutes later weighing will be finished and the machine will automatically calculate the
best washing process. This can save a lot of water. If you don’t need the automatic weighing, you can press “Auto
” button to switch to the gear of manually selecting the amount of clothing (screen display shows L-1 - L-A). When
gear is set up, the washing machine will adjust the water, heating and washing time and so on in accordance with
the set gears to save water, time and power.
(1) D "L-1"-"L-A" correspond to the amount of clothing in barrel of 1-7, in the manual selection, when the barrel
has a lot of clothes (more than one half), please select "L-6 " or "L-A". if the barrel of clothing is relatively few
(less than one half), please select one in "L-1", L-2", "L-3", "L-4" and " L-5"
(2) Please adjust the dosage of washing powder in accordance with the gears show on screen.
_ Press the “Speed” button to select spinning speed. The maximum allowable spinning speed varies with
programs.
Note: Different water temperatures and spinning speeds can be set for different laundries.
Wash using the default settings if there is no special requirement.
_ Press the “Temp.” button to select heating temperature (--, 30, 40, 50, 60, 90). The maximum allowable
heating temperature varies with programs.
Note:“--” in the temperature display indicates non-heated washing.
09
Before use
F
Display
screen
G
Washing time Press the “Wash” button to set washing time. Press and hold this button to change the time continuously. Click this
H
I
button up until the end.
Note: This function is not applicable to “ Spin ” and “ Self-clean ” process
Times of rinse Press the “Rinse” button to select the times of rinsing and the maximum allowable times of rinsing is 8.
Spinning time Press the “Spin” button to select spinning time. The maximum allowable spinning time varies with programs.
J
¬ Detergent
distribution
drawer
_Display washing time, remaining time, times of rinsing, spinning time, temperature setting value, speed setting
value, position of clothes weight, child lock state, door lock state, washing progress and alarm message, etc.
_Open the drawer, three compartments can be seen:
2
3
Compartment 1: Prewash detergent
1
Compartment 2: Detergent for programs 1 to 10.
Compartment 3: Softener, conditioning agent, perfume, etc.
K Strong wash- Press "Strong wash" button to increase the washing time and times of rinsing during the main washing stage of
ing button
selected program.(This feature is applicable for dirty clothes ) The illuminated icon indicates the “strong wash”
function is selected. This additional function applies to “cotton”, “memory”, “synthetic” ,“Silent” “heavy”and
“Sport wash” programs only. This button is effective before starting a program.
Press the “Delay” button and the illuminated icon indicates that the “delay” function is selected. The delay time
L ¬Delay
Button
(0.5-24h) increases by 30 minutes each press of “Delay” button. The time will change continuously if you press
and hold this button until you release it. The delay time is the end time of washing. For example, 6:00 means the
washing ends after 6 hours (the delay time must be longer than the program’s running time). The “Delay” function
is not available for “Spin” and “Self-clean” programs.
Note:The delay time must be longer than the program time;otherwise,the washing machine
will start the wash program directly.
Press the “Pre-wash” button to select or cancel the prewash program. The prewash program can be selected
M Pre-wash
button
for washing heavily soiled clothes. Press the “Prewash” button, the “Pre-wash” icon will illumin ate. Press the
“Pre-wash” again, the prewash function will be cancelled and the “Pre-wash” icon will go out. When selecting the
prewash function, add a proper amount of detergent into the prewash box, otherwise do not add any detergent
into the prewash box. This additional function applies to “cotton”, “memory”, “synthetic” and “Sport wash”
programs only.
N Soak button Press "Soak" button to startup/shutdown the crease-resistant and soak function. When the process runs to the last
rinse, the washing machine is not going to drain, clothes will be soaked in water, and the soak icon flashes, the
remain time not decreasing. If you need to dry the clothes, you can press "Soak" button or “start /pause”button,
then the icon will be off to cancel this function, and the washing machine continue to work. This feature and the
"Delay"button can not be chose at the same time. Also this feature is only effective in the “cotton”, “memory”,
“synthetic”,“heavy” , “Delicate”, “Sport wash”, “Silent” process.
_ Press the “Start/pause” button, the washer will start and the indicator light remains on. If this button is pressed
O ¬ Start/
Pause Button when the washer is in operation, the washer will pause and the indicator light will flash. When power is on, but
you do not press "Start / Pause" button to start the washing machine, if it meets door open condition,please press
the button for 2 seconds and the door will be open.
2
1
10
using the APPLIANCE
Program selection
PROGRAM MODES
2
2
1 Detergent compartment for prewash mode
3
2
2 Detergent compartment
1
3 Compartment for softener and
other additives
1
Program
Temperature
Maximum
Preset
1
¬ Cotton
- - to 90 °C
2
¬ Memory
3
Preset spin speed
Recommended
Laundry
HW70-I1286/HW80-I1486
30°C
Cotton fabrics
800 rpm
- - to 90 °C
30°C
Cotton or synthetic
800 rpm
¬ Synthetic
- - to 60 °C
30°C
Cotton fabrics
800 rpm
4
¬ Wool
- - to 40 °C
-----
Woolen fabrics
600 rpm
5
¬ Silk
- - to 40 °C
-----
Silk
400 rpm
6
¬Heavy
- - to 60 °C
40°C
Heavy soiling
800 rpm
7
¬ Delicate
- - to 90 °C
60°C
Underwear
800 rpm
8
¬ Sport wash - - to 90 °C
30°C
Sports wear
800 rpm
9
¬ Silent
- - to 90 °C
30°C
Cotton or synthetic
600 rpm
10 ¬ Quick
- - to 40 °C
-----
800 rpm
11 ¬ Spin
-----
-----
Slight-soil cotton, linen
and synthetic fabrics
Cotton or synthetic
None
800 rpm
12 ¬ Self-clean
90°C
Yes
No
2
90°C
Optional
3
1
1000 rpm
11
using the APPLIANCE
Consumption and technical data
CONSUMPTION TABLE
The wash cycle times are intended as a guide only. The actual time used may vary due to different water pressure, initial water
temperature, etc.
PROGRAM
MAX. LOAD
HW70-I1286/HW80-I1486
Temperature
WASHING TIME
¬ Cotton
7kg/8kg
30°C
1:32 h
¬ Memory
7kg/8kg
30°C
1:32 h
¬ Synthetic
3kg/3kg
30°C
1:00 h
¬ Wool
1kg/1kg
-----
0:44 h
¬ Silk
1kg/1kg
-----
0:42 h
¬Heavy
7kg/8 kg
40°C
2:12 h
¬ Delicate
3kg/3kg
60°C
1:39 h
¬ Sport wash
7kg/8 kg
30°C
1:32 h
¬ Silent
7kg/8 kg
30°C
1:32 h
¬ Quick
3kg/3kg
-----
0:26 h
¬ Spin
7kg/8 kg
-----
0:09 h
0 kg
90°C
1:00h
¬ Self-clean
*) EN 60456 test program / Energy label program with Standard 60°C and max. spin speed and Intense
function.
TECHNICAL DATA
HW70-I1286/HW80-I1486
Power source
Max. working current (A)
Water pressure (MPa)
Nominal load (kg)
Spinning speed (r/min)
Washing programs
Max power (W)
Dimensions (HxDxW mm)
Net weight (kg)
220 - 240V~/50Hz
10
0.03≤P ≤1
7/8
1200/1400
12
2000
850 x 650 x 595
75
12
Washing methods
PLEASE NOTE
using the APPLIANCE
This washing machine is for domestic use only. If the machine is use for commercial purpose the guarantee
will not be valid anymore.Do not use it for purposes other than that for which it was designed. Follow the
instructions given on the label of each garment and wash only machine-washable garments.
Power supply
Connect the washing machine to the power supply (220V to 240V~/50Hz).
Water connection
Turn on the tap. The water must be clean and clear.
Note: Before use, check for leakage in the joints between the tap and the inlet hose
by turning on the tap.
Preparing the laundry
¬ Sort out clothes according to fabric (cotton, synthetics, wool or silk) and to how dirty they are.
¬ Separate white clothes from coloured ones. Wash them first by hand to check if they fade or run.
¬ Empty pockets (keys, coins, etc.) and remove the harder decorative objects (e.g. brooches).
Attention: Small parts (like buttons, etc) may lead to repair work which user has to
pay by themselves and can cause damage in the machine.
¬ Garments without hems, underwear, finely woven textile such as fine curtains are to be put into wash
bag (it is better not to wash them in a washing machine).
¬ Close zippers and hooks, make sure the buttons are sewn on tightly and place small items such as
socks, belts, bras, etc. in the wash bag.
¬ Unfold large pieces of fabric such as bed sheets, bedspreads, etc.
¬ Turn shirts inside out.
13
using the APPLIANCE
Loading the machine
Heavy
Wash
Temp.
Rinse
Auto
Delay
Pre-wash
Soak
Delicate
Silk
Speed
Spin
Strong wash
Sport wash
Wool
Silent
Synthetic
Quick
Memory
Spin
Power
Self-clean
Cotton
Start / Pause
HW80-I1486
Press and hold 2seconds
to set door unlocked
Open the washer door, put in the laundry piece by piece. Close the door tightly.
¬ When first using the washing machine, let it run unloaded for one program to prevent the laundry
from being tainted by oil or dirty water from the washing machine. Before washing you should run the
machine without laundry, but with detergent, with 60°C programm.
¬ Do not overload the washing machine.
Selecting detergent
The washing efficiency and the performance is determined by the quality of detergent used. Special
non-foaming detergent produces good washing results. Use specific detergents for synthetic and woollen
goods. Do not use dry cleaning agents such as trichloroethylene and similar products.
Note: Do not add more detergent than needed; otherwise, it may cause the situations as following and
washing machine malfunction impacting washing machine’s life.
1.Due to the increasing foam, the rinse time will be longer than normal;
2.The foam may overflow from the detergent drawer because of the increasing pressure of the foam;
3.It may remain foam without cleaning out after the final spinning cycle.
Recommendation:
1.Clean the detergent drawer once a week.
2.When using the prewashing program, please add half of the rating dosage.
3.Please follow the dosage recommendation on the powder or liquid detergent package.
Adding detergent
Slide out the detergent drawer and put the required detergent and softening agent into the corresponding
compartments. Push back the drawer gently. (Refer to the instructions on the drawer)
2
3
2
1
Caution:
1
¬ For prewashing program, detergent should be added to both compartments 1 and 2.
For other programs, do not add detergent to compartment 1.
¬ Use liquid detergent according to the instructions on its package. Do not use liquid detergent if the prewash mode or "Start delay" is selected.
¬ Do not overuse softener; otherwise, it will damage the artificial fibers.
Selecting Program
To get the best washing results, an appropriate washing program should be
selected according to the laundry type. Please turn the program knob to
select the right program.
Selecting functional
Select the required options. (Refer to the "Control panel" pages 08 and 09)
Heavy
Delicate
Wash
Temp.
Silk
Wool
Silent
Rinse
Speed
Synthetic
Quick
Memory
Spin
Spin
Strong wash
Auto
Delay
Pre-wash
Soak
Cotton
Start / Pause
Press and hold 2seconds
to set door unlocked
Sport wash
Self-clean
Power
14
using the APPLIANCE
Setting washing temperature
Heavy
Wash
Temp.
Silk
Rinse
Speed
Synthetic
Wool
Press and hold down the temperature button until the desired temperature is selected .
Setting spin speed
Press and hold down the speed button until the desired speed is selected.See "Operational functions" on the "Control panel" pages (08 and 09) for selecting temperature
and spin speed. It is advisable to select the recommended value.
Washing
Press the Start/Pause button. The washing machine will operate according to the
preset programs. The washing machine will stop operation automatically when a
washing cycle ends. The "End" sign will appear on the display. Open the washer door
and take out the laundry.
Spin
Strong wash
Memory
Auto
Delay
Pre-wash
Cotton
Start / Pause
Soak
Press and hold 2seconds
to set door unlocked
Heavy
Wash
Temp.
Silk
Rinse
Speed
Synthetic
Wool
Spin
Strong wash
Memory
Auto
Delay
Pre-wash
Cotton
Start / Pause
Soak
Press and hold 2seconds
to set door unlocked
Heavy
Wash
Temp.
Silk
Rinse
Speed
Synthetic
Wool
Spin
Strong wash
Memory
Auto
Delay
Pre-wash
Cotton
Start / Pause
Soak
Press and hold 2seconds
to set door unlocked
Heavy
Wash
Temp.
Rinse
After washing
Turn off the water supply and unplug the power cord. Open the washer door to prevent formation of
moisture and odours. Let the door open while not used.
Tips for saving energy
1. Collect clothes for one full wash load.
2. Avoid overloading the washing machine.
3. Prewash only heavily soiled clothes.
4. Reduce the amount of detergent or choose standard or delicate wash programs for slightly soiled clothes.
5. Choose a proper washing temperature. Modern detergents can wash with very good result already in lower
temperature than 60°C. Only use higher temperature than 60°C for heavily soiled laundry.
6. Follow the dosage recommendation on the detergent package to avoid using too much detergent.
Speed
Spin
Strong wash
Auto
Delay
Pre-wash
Soak
Silk
Delicate
Sport wash
Wool
Silent
Synthetic
Quick
Memory
Spin
Cotton
Power
Self-clean
Start / Pause
Press and hold 2seconds
to set door unlocked
HW80-I1486
15
using the APPLIANCE
Care chart
Resistant material
Bleachable in cold water
Don't dry clean
Delicate fabric
Do not bleach
Dry flat
Washable at 95 °C
Iron at 200 °C
Hung to dry
Washable at 60 °C
Iron at 150 °C
Dry on clothes hanger
Washable at 40 °C
Iron at 100 °C
Tumble dry, normal heat
Washable at 30 °C
Don't iron
Tumble dry, reduced heat
Hand wash
Dry cleaning with any solvent
Don't tumble dry
Dry clean only
Dry cleaning with pericloride
Wool Seal
Dry cleaning with aviation fuel
LOAD REFERENCE
Bed sheet (single)
Cotton
Approximately 800g
Blanket
Wool
Approximately 3000g
Blended fabric clothes
/
Approximately 800g
Jackets
Cotton
Approximately 800g
Jeans
/
Approximately 800g
Overalls
Cotton
Approximately 950g
Ladies Pyjamas
/
Approximately 200g
Shirts
/
Approximately 300g
Socks
Blended fabrics
Approximately 50g
T-Shirts
Cotton
Approximately 300g
Underwear
Blended fabrics
Approximately 70g
16
Cleaning & care
maintenance
After washing
Turn off the water supply and pull out electricity plug after each wash.
Open the washer door to prevent formation of moisture and odours. If
the washing machine is left idle for a long period, drain the water in
the machine and replace the drain hose.
1.
2.
Cleaning the detergent drawer
1.
Clean the detergent distribution drawer regularly.
Swing out the drawer, flush it clean with water and then replace it.
2.
Cleaning the machine
Unplug the machine during cleaning and maintenance. Use a soft cloth
dampened with soap liquid to clean the machine case and rubber components. Do not use organic chemicals or corrosive solvents.
Cleaning the filter
Clean the filter once a month:
1. Open the bottom cover.
2.Remove the filter by turning counterclockwise.
3.Flush the filter clean with running water.
4.Replace the filter by turning clockwise and
remount the cover.
1.
2.
3.
4.
Caution:
1.The filter must be in place, or it may lead to leakage.
2.Place a container under the drain pump filter, to collect
any excess water that may come out of the drain pump
when the filter is removed.
17
maintenance
Water inlet VALVE and inlet VALVE filter
To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and
inlet valve filter regularly.
Moving the machine
If the machine is to be moved to a distant location, replace the transportation bolts removed before installation to prevent damage as
shown below.
1.
2.
3.
4.
5.
Remove the back cover.
Remove the blanking plugs.
Insert the synthetic stabilisers and the transportation bolts.
Tighten the bolts with a spanner.
Replace the back cover.
1.
2.
3.
4.
Long periods of disuse
If the washing machine is left idle for a long period, pull out the electrical plug and turn off the water supply. Open the washer door to
prevent formation of moisture and odours. Let the door open while not used.
Heavy
Wash
Temp.
Rinse
Speed
Spin
Strong wash
Auto
Delay
Pre-wash
Soak
Silk
Delicate
Sport wash
Wool
Silent
Synthetic
Quick
Memory
Spin
Cotton
Power
Self-clean
Start / Pause
Press and hold 2seconds
to set door unlocked
HW80-I1486
18
Display codes
maintenance
DISPLAY CODES AND SPECIAL FUNCTIONS
CODES
CAUSES
SOLUTIONS
Err1
Err2
¬ Door is not properly shut.
¬ Drainage error, water not emptied within 6
minutes.
¬ Temperature sensor not properly connected or
damaged.
¬ Heater error (Appears at the end of a cycle).
¬Water level not met in 8 minutes.
_ Shut the door properly.
_ Clean the filter and check the drain hose for blockage. If error
still exists, please contact the maintenance personnel.
_ Contact the maintenance personnel.
Err3
Err4
Err5
¬The height of the drain hose is below 80 cm.
_ Contact the maintenance personnel.
­_ Make sure that tap is turned on, and water pressure is normal.
If problem still exists, please contact the maintenance personnel.
_ Install drain hose within 80-100 cm of height.
_ Make sure the drain hose is not in water.
Err7
Err8
End
1:25
¬ The drain hose is in water.
¬ Motor error.
¬ Water exceeds protective level.
¬ End of wash cycle.
¬The remaining time is 1 hour 25 minutes.
19:30
¬Status information:Preset time for delayed operation.
UNb
After the last rinsing cycle finishes,spinning fails completely due to unbalance of the laundry.
_ Contact the maintenance personnel.
_ Contact the maintenance personnel.
¬ Control panel lock function: Press the "Delay" and the "Start/Pause" buttons simultaneously for 3 seconds after starting a program.
It can no longer be changed by operating buttons or knobs. To unlock press the "Delay" and "Start/Pause" buttons again for 3
seconds.
¬ Power-off memory function: In case of abrupt power failure or the need to cut off the power during a program cycle, the present
settings will be saved and the preset operation will resume when the power is on again.
¬ To cancel a program
Press the "Start/Pause" button, then switch off the power and the program is automatically cancelled. Turn the program selector
again to choose another program.
Note: During the spin process, if too much foam is inspected, in order to protect the motor, the washing machine will eliminate the
foam automatically; the motor will stop and the drain pump will drain the water continuously for 90 seconds. If it happens more than
3 times, the motor will stop until the end of cycle without spinning.
¬ AMT
Technology of anti-bacteria and mildew-proof with window pad.
Troubleshooting
maintenance
19
TROUBLESHOOTING
The following circumstances do not constitute problems. Do not contact the Service Center until the problem has been confirmed.
PROBLEM
CAUSES
SOLUTIONS
Washing machine fails to
operate.
¬ Poor connection to the power supply.
¬ Power failure.
¬ The washer door is not properly closed.
¬ Machine has not been switched on.
_
_
_
_
Check connection to the power supply.
Check the power supply.
Close the washer door properly.
Make sure the machine is switched on.
Washing machine cannot be ¬ The "Start/Pause" button is not pressed.
filled with water.
¬ Water tap is not turned on.
¬ Water pressure is less than 0,03 Mpa.
¬ The inlet hose is kinked.
¬ Water supply failure.
¬ The program knob is not properly set.
¬ The washer door is not properly closed.
¬ The inlet hose filter is blocked.
_
_
_
_
_
_
_
_
press the "Start/Pause" button.
Turn on the water tap.
Check water pressure.
Check the inlet hose.
Ensure the water supply.
Set the program knob properly.
Close the washer door properly.
Unblock the inlet hose filter.
Machine is draining while
being filled.
¬ The height of the drain hose is below 80 cm.
¬ The drain hose is in water.
_ Install drain hose within 80-100 cm of height.
_ Make sure the drain hose is not in water.
Drainage failure.
¬ Drain hose is blocked.
¬ Drain hose end is higher than 100 cm above
the floor level.
¬ The filter is blocked.
_ Unblock the drain hose.
_ Make sure the drain hose end is lower than
100 cm above floor level.
_ Unblock the filter.
Strong vibration while
spinning.
¬ Not all transportation bolts have been removed.
¬ Washing machine is located on an uneven
surface or is not level.
¬ Machine load is over Max load.
_ Remove all transportation bolts.
_ Make sure the washing machine is on
an even surface and levelled.
_ Reduce amount of laundry in the drum.
Operation stops before
completing wash cycle.
¬ Water or electricity failure.
_ Check the power supply.
Operation stops for a period
of time.
¬ Washing machine gives an error message.
¬ Washing machine is in soaking cycle?
_ Check display codes.
_ Press the rinse hood button or the Start/pause
button again to cancel it.
Excessive foam in the
¬ The detergent is not a low-foaming type or for
drum, which is spilled to the manual wash.
distribution drawer.
¬ Excessive use of detergent.
_ Check if your detergent is appropriate.
_ Reduce amount of detergent in the distribution
drawer.
Automatic adjustment of the ¬ The washing program duration will be adjusted _ This is normal and doesn't affect the
washing time.
functionality.
Spinning fails
¬ Unbalance of the laundry
_ Add clothes or run a spinning program again.
20
WIRING CIRCUIT
WIRING CIRCUIT
Waterlevel temperature
sensor
sensor
X1- 1 X1- 2 X1- 3 X1- 4
X1- 8
X1- 7
X1- 6
X1- 5
heating wire
R
FA3
N
L
RTF
G
display board
RX/TX
X6- 3
X8- 4 X8- 3 X8- 2 X8- 1
X5- 3
X7- 4
X4- 1
FA
FA1
12V
INT
GND
X4- 3
MRL
driving board
MRN
door lock
MRC
J101- 1
J101- 2
inductor
X7- 3
J301- 1
X6- 2
J301- 2
X7- 1
J301- 3
X1- 5
X1- 4
X1- 3
X2- 3
EVF
EVFX
X2 - 4
EVP
EVPX
X5 - 1
BI
BIX
L'
FA:Anti-jamming suppresser
BIX：drain motor
EVPX：prewash Water inlet valve
EVFX：
mainwash Water inlet valve
frequency conversion
motor