Transcript
234019/819.0229 Aluminum Diaphragm Pump Extension Kit For 2 in. NPT or 50.8 mm BSPT ported aluminum pumps only. Extends the outlet manifold to match the inlet-to-outlet distance of a Wilden or ARO aluminum pump. Read warnings and instructions. Refer to manual 308368 or 819.4273. 406568B Replace short bolts with long ones provided in kit. Torque to 190-220 in-lb (21.5-24.9 N•M) Replace o-ring if applicable Place small o-ring in groove on the extension Orient this side down NOTE: To ensure proper sealing, always replace o-rings when pump is disassembled.
