Download Graco 344913EN-A User's Manual
Transcript
Agitator Speed Controller Automatic Speed Controller* for Air Drive Agitators Maintain consistent agitator speed, even with an empty drum • Quick install, requires less than 1 minute to setup •Prevents over agitation for shear sensitive and waterborne materials •Saves energy by limiting agitator over speeding •Prevents motor over speeding, extending lifetime * U.S. Patent Pending Target Applications •Waterborne material •Shear-sensitive material •Energy conscious users Ordering Information Part No. Description 24G621 Agitator Speed Controller Installation Information Speed controller fits on most Graco air driven agitators and many competitive agitators. Contact your Graco Account Manager for more information. Technical Specifications Maximum air input pressure 100 psi (7 bar, 0.7 MPa) Maximum speed 1000 rpm Speed control range 100-1000 rpm Weight 1.4 lb (0.64 kg) Performance Curve Speed Controller versus Needle Valve 2300 1300 Needle valve at 400 RPM Speed Controller at 400 RPM 800 Speed - RPM 1800 300 FULL 3/4 1/2 1/4 0 Drum Level All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Call today for product information or to request a demonstration. 877.84GRACO (1-877-844-7226) or visit us at www.graco.com. ©2011 Graco Inc. Form No. 344913 Rev. A 4/11 Printed in the U.S.A. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.