Download Graco 309405J User's Manual

Instructions
Trailer Hitch Conversion
Kit 245321
309405J
EN
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
10 mph (16 kph) Maximum Operating Speed
Graco LineLazer 3900, 5900, and 200HS
Graco LineLazer 3500 and 5000
Note: Bracket on
inside of Frame
4
4
Note: Bracket on
outside of Frame
ti14979a
ti14980a
5
Remove two bolts (4) in frame of LineLazer.
GrindLazer 270 and 390
1.
Remove brake from striper.
2.
Remove two bolts (4) in frame of LineLazer.
Drill 3/8 in. holes through hitch receiver, if necessary.
3.
Drill 3/8 in. hole in center of axle. Install hitch receiver as
shown. Replace two bolts (4) plus third bolt (5) through
frame.
Other Stripers
4
6
3
5
7
4
8
ti14982a
ti14981a
1.
Remove ball from standard hitch assembly.
1.
2.
Align bracket (7) and assemble two locknuts (6) and bolts
(5).
Install hitch receiver similar to LineLazer installation
instructions shown.
2.
Drill 3/8 in. holes as necessary for installation of bolts (4).
Assemble bolt (4) and locknut (6).
3.
Use U-bolt (3) on round axles.
Assemble ball onto bracket (7) with washer (8) and
locknut.
4.
Mount hitch level.
3.
4.
NOTE: Other modifications may be necessary, depending on
sprayer.
Parts Drawing
ti1673b
Ref.
1
2
3
Part
287681
116913
116997
4
5
6
7
8
111194
116935
101566
16C486
110947
Description
Qty.
HITCH, LineDriver
1
BALL, trailer
1
U-BOLT, 3/8-16 (used on line strip1
ers with round axles)
SCREW, cap, flange hd
3
SCREW, cap, flange hd
3
NUT, lock
8
BRACKET, hitch mount, painted
1
WASHER, plain
2
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents
Original instructions. This manual contains English. MM 309405
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2009, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revised September 2012