Download Graco 307431s User's Manual
Transcript
This manual contains changes not included throughout the contents. Please see the second page of this book (page 1A) for a description of the revisions and additions. Instruction Manual – Parts List Changes This page contains a summary of changes or additions that do not appear in the contents of the manual. Models 221-074 and 221-026 are obsoleted per ECO V0411. On Model 215-930, Part No. 167-669 Sleeve (Ref. No. 4) is replaced by Part No. 178-896 Sleeve, per ECO V1616. Part No. 167-670 Displacement Rod (Ref. No. 17) is replaced by Part No. 178-895 Displacement Rod, per ECO V1618. Model 918-417 Series A Pump is added to the manual per ECOs V6073 and Z001124. Model 918-417 contains the same parts as Model 215-930, including the changes above, with the following exceptions: Ref. No. 6, Part No. 167-665 V-Packing: Change quantity to 10. Ref. No. 10 is Part No. 167-667 Male Gland, quantity 2. Ref. No. 11 is Part No. 167-664 Female Gland, quantity 2. Ref. No. 13 is Part No. 617-582 Intake Housing, quantity 1. Ref. No. 21 is Part No. 183-021 Ball Guide, quantity 1. Ref. No. 22 is not used in Model 918-417. In the Dimension Chart on page 10, enter the following values for Model 918-417: Column A: 13.12 (333.2) Column B: 10.29 (261.4) Column C: None Column D: 1/2 (f) Column E: 5/8-11(m) Column F: 0.406 (10.34) In the Technical Data Chart on page 11, Model 918-417 has the same values as Model 215-930, except the Maximum Working Pressure is 3000 psi (210 bar). This working pressure should also be noted on the front cover and under the heading System Pressure in the Warnings section on page 2. 307431 1A Notes 307431 1B