Transcript
50 78 34 60 62 30 36 77 35 77 48 51 61 62 50 90 63 84 ts 5, ten . Pa 99,93 0 U.S 2, 4,9 20,48 ing ,06 0, 5,4 pend 4,280 ,53 tents 5,353 er pa oth and REM 38 78 31 1 86 85 UN T MO W plate Push ent hm Attac Arm r ecto l conncover. B. trica e t elec otectiv r jack pr de nnec isco sert in d un 1. D d rein lease ro d as an rt re e ro g leas ectin Inse r. re nn on 2. colla down twist co sh Stand and Jack on 3. Pu u pull 1-3 yo sB r se pin. eat Step de. Colla st lic ho si Jack Leg Rep enger hydrau r with du Jack 4. t ss ve g paPARKED. nnec d co ectinVEHICLE IS LOWER BLADE WHEN Conn Disco lings an Pin 5. coupPLACING REMOVE BLADE ASSEMBLY BEFORE s. ug pl VEHICLE ON HOIST. ase rele B. g pin to tin on nnec vers l co ist con. trica io r to 1. Tw tens ove elec ecto on nn em l co tor 2. R hicle. ectrica nnec ve ng co ch el Atta spondi on e. 3. 3 rre 1cl co cle. sB vehi s to vehi t step de of se ea si ho r T ep lic 4. R ssengehydrau s. (BEL pa ct nect onne scon 5. C ick di NLY) qu EO DRIV DO NOT EXCEED GVWR OR GAWR INCLUDING BLADE AND BALLAST. A. l in ntro b co e ca at". ck Plac er/Flo down. ard. Ja "Low lift arm r outw proper ve Push jack le just to 2. Pull d will ad 3. Jacknd stan ht. ar Sta adge READ OWNER'S MANUALHeBEFORE OPERATING heig OR 1. CAUTION r Leve SERVICING SNOWPLOW. Jack Leve 96 r Jack EXCEED 45 MPH. TRANSPORT SPEED SHOULD NOT d n an C. chai ty of REDUCE SPEED UNDER ADVERSE TRAVEL ing en CONDITIONS. carry ing pl d av ease war Rel ch it le d to PLOWING SPEED SHOULD NOT EXCEED 10 MPH. ta 1. war pins reat ar up ting k. ) slac headge connec SEE YOUR SALES OUTLET FOR APPLICATION aised d (R and Push cle until e. Stan ard RECOMMENDATIONS. 2. hi ac tw Jack pl ve r ou in snap jack leve stand. ck ll e ja Pu 3. e th rais 8248 59900 88 51 93 X 97 79 19 91 70 50 16 65 71 9 17 PLO WARNING 48 11 L OW g Pin ectin Conndrawn With 64 20 ING fully A. ard forw es into cle at vehi pushpl rive s. 1. D gagingent arm en hm att ac 87 2 GP g rryin C. m ca . k fro plow slac tach. at ove from Rem n and re away e 1. chai vehicl Back 2. 36 19 OVIN 32 18 41 67 69 39 98 100 68 51 80 20 94 35 66 95 10 49 8 73 35 6 84 81 35 42 40 7 101 74 62 50 92 75 3 72 84 77 33 5 82 47 83 51 102 99 78 12 76 43 ACCESSORIES BLADES 44 48 15 Item 60 61 14 4 37 45 38 13 62 63 46 64 ** RD headgear shown. LD, HD, MC, and V parts may look different. ** HEADGEAR Item 1 2 3 4 5 6 Part 21920 22341 22090 8580 8480 20758 21846 8514 20070 8561 8533 20759 8202 8551 8183 20487 20488 Description Lift Arm Headgear (6'-9" LD) Headgear (7-1/2' LD) Headgear (RD/HD) Headgear (HD) Headgear (MC) Headgear (V) Headgear Brace (RD/HD, HD, MC, V) Lower Gear (6'-9" LD) Lower Gear (7-1/2' LD, RD/HD) Lower Gear (HD, V) Lower Gear (MC) Release Rod (6'-9" & 7-1/2' LD) Release Rod (RD/HD, HD, MC, V) Jack Support (6'-9" & 7-1/2' LD) Jack Support (RD/HD) Jack Support (HD, MC, V) Item 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Part 8184 20490 20491 27164K 8180 8499K 7794 90658 20185 6920K 6815 821 8498 8741 8284K 4289K 7904K 65 Description Jack Leg (6'-9" & 7-1/2' LD) Jack Leg (RD/HD) Jack Leg (HD, MC, V) Jack Handle Kit Jack Lever (6'-9" & 7-1/2' LD) Jack Lever (RD/HD, HD, MC, V) 1/2 OD x 2 Compression Spring 5/32 x 1-1/4 Cotter Pin Torsion Spring Kit Connecting Pin Kit Connecting Pin w/Handle 1 ID x 3-1/2 Compression Spring Bolting Bar (7-1/2' LD, RD/HD, HD, MC, V) Cable Boot Bracket Cable Boot 3/4 x 1-7/8 Machine Pin w/Cotter Pin Clevis Pin w/Cotter Pin A-FRAMES Item 30 32 Part 22169 22175 8562 22168 8627 20703-1 33 34 35 36 37 38 39 40 21874-3 22259 90013 7903K 90601 7905K 20789 20775 31 Description A-Frame w/Hardware (6'-9" LD) A-Frame w/Hardware (7-1/2' LD) A-Frame w/Hardware (RD – X = 22-1/2") A-Frame w/Hardware (HD – X = 22-1/2") A-Frame w/Hardware (HD – X = 25-1/8") A-Frame Kit w/Hardware and Angle Frame Guide (MC) A-Frame (V) 1 OD x 8-3/4 Pivot Pin 1/4 x 2 Cotter Pin Anchor Pin w/Cotter Pin 1/4 x 1-1/2 Cotter Pin Pivot Pin w/Cotter Pin 1-1/4 x 6-3/4 Commercial Pivot Pin Commercial Angle Frame Guide Item Part Description 41 20790 Commercial Ram Pin 42 20988 V-Plow Pivot Pin 43 26463 1/4 x 2 Slotted Spring Pin 44 22260 1 OD x 4-3/4 Clevis Pin 45 26583 Blade Stop 46 21484-1 Push Assembly 47 22161 A-Frame Stop Kit 48 7904K Clevis Pin w/Cotter Pin 49 5150 1-1/4 x 4-7/8 Anchor Pin 50 8229 Chain Bag (LD) 8565 Chain Bag (RD) 8555 Chain Bag (HD, V) 21853 Chain Bag (MC) 51 A6148K U-Bolt w/Hardware 66 67 68 69 70 71 Part – – 22180 22181 5523K – – – – – 7869 7667 7668 26885 7669 – – 22369 27259 20628 20629 27240 20639K 7903K 5523K 27241 20702 27237 90127 91337 1 Description 6'-9" Blade3 (LD) 7-1/2' Blade3 (LD) 6'-9" Base Angle (LD) 7-1/2' Base Angle (LD) 3/4 x 2-3/16 Machine Pin w/Cotter Pin 7' L-Series Blade3 (RD) 7-1/2' L-Series Blade3 (RD) 8' L-Series Blade3 (HD) 8-1/2' L-Series Blade3 (HD) 9' L-Series Blade3 (HD) 7' Base Angle (RD) 7-1/2' Base Angle (RD) 8' Base Angle (HD) 8-1/2' Base Angle (HD) 9' Base Angle (HD) 9' Blade3 (MC) 10' Blade3 (MC) 9' Base Angle (MC1) 9' Base Angle (MC2) 10' Two-Piece Base Angle – DS (MC1) 10' Two-Piece Base Angle – PS (MC1) 10' One-Piece Base Angle (MC2) 3/4 x 3-15/32 Machine Pin w/Cotter Pin1 Anchor Pin w/Cotter Pin 2 3/4 x 2-3/16 Machine Pin w/Cotter Pin 1 1 x 2-3/4 Clevis Pin w/Cotter Pin 2 Angle Frame (MC1) Angle Frame (MC2) 5/8-11 x 1-1/2 Hex Cap Screw G5 5/8-11 Hex Locknut GB Item 72 73 74 75 76 77 78 79 80 81 82 83 84 85 Part – – 21569 26599 21570 26600 21564 26597 21565 26598 22260 90601 20790 90013 21001 21873 26858 63508 26523 A5517 26464 21452 86 87 88 20757 21450 27406 5323 26656K Description 8-1/2' EZ-V® Blade 9-1/2' EZ-V® Blade 8-1/2' Blade Half – DS (V) 9-1/2' Blade Half – DS (V) 8-1/2' Blade Half – PS (V) 9-1/2' Blade Half – PS (V) 8-1/2' Base Angle – DS (V) 9-1/2' Base Angle – DS (V) 8-1/2' Base Angle – PS (V) 9-1/2' Base Angle – PS (V) 1 OD x 4-3/4 Clevis Pin 1/4 x 1-1/2 Cotter Pin Commercial Ram Pin 1/4 x 2 Cotter Pin Center Deflector (bolted A-Frame) Center Deflector Center Flap Kit Rubber Flap 6" Solid Cast Shoe Assembly (RD, HD, MC2, V) 7" Anti-Wear Shoe Assembly (MC1) Removable Spring Assembly (LD, RD, HD, 10' MC2) Removable Spring Assembly (9' MC, 10' MC1, V) Removable Spring Bar (LD, RD, HD, 10' MC2) Removable Spring Bar (9' MC, 10' MC1, V) Trip Spring (LD, RD, HD, 10' MC2) Trip Spring (9' MC, 10' MC1, V) Shoulder Bolt w/Locknut = Distinguished by a 3/4" base angle pin and a 3/8" Top Anchor; 10' blade has a two-piece base angle = Distinguished by a 1" base angle pin and a 1/2" Top Anchor; 10' blade has a one-piece base angle 3 = Complete blade no longer manufactured. 2 G = grade Item Part Description 90 28549 Universal Label Replacement Kit 91 22400K 2 oz. Dielectric Grease Tube 92 26239 ProTube™ Bumper/Grille Guard – Stainless 26240 ProTube™ Bumper/Grille Guard – Black 93 26018-1 Mini Strobe Light 94 26019 Full-Size Strobe Light 95 26020-1 Mini Bar Light 96 8251 7-1/2' SnoFoil® Assembly (RD) 8252 8' SnoFoil® Assembly (HD) 26880 8-1/2' SnoFoil® Assembly (HD) 8253 9' SnoFoil® Assembly (HD) 22380 9' SnoFoil® Assembly (MC) 22200 10' SnoFoil® Assembly (MC) 97 22470-1 7-1/2', 8', 8-1/2', & 9' Rubber Deflector (LD, RD, HD) 21619 8-1/2' Rubber Deflector (V) 26572 9-1/2' Rubber Deflector (V) 22390 9' & 10' Rubber Deflector (MC) 22269 6'-9" Steel Deflector (LD) 283 7-1/2' Steel Deflector (LD, RD) 26480 8' Steel Deflector (HD) 26485 8-1/2' Steel Deflector (HD) 26490 9' Steel Deflector (HD, MC) Item 98 Part 22215 22216 5532 5533 26460 5534 28408 26593 27362 27239 99 27195 7906K 26530K 100 20043 101 26145 102 20555 ns 26812-1 ns 5242 ns 20498 ns 27242 ns 5492Y ns 5490Y ns 28531 ns 28532 Description 6'-9" Poly Cutting Edge (LD) 7-1/2' Poly Cutting Edge (LD) 7-1/2' Steel Cutting Edge (RD) 8' Steel Cutting Edge (HD) 8-1/2' Steel Cutting Edge (HD) 9’ Steel Cutting Edge (HD) 8-1/2' Steel Cutting Edge (V) 9-1/2' Steel Cutting Edge (V) 9' Steel Cutting Edge (MC) 10' Steel Cutting Edge – 2 Sections (MC) 26" Flexible Blade Guide Set (LD, MC, V) Blade Guide Set (RD, HD) Commercial Blade Guide Set (All) Spring Replacement Tool Shoe Kit (LD) Skid Plate Kit Plow Parka 12 oz. Yellow Spray Paint (Painted Blades) 12 oz. Black Spray Paint (Powder-Coat) 12 oz. Yellow Spray Paint (Powder-Coat) 1 Quart Yellow Paint Can 1 Gallon Yellow Paint Can 1 Quart EZ Flow Hydraulic Fluid 1 Gallon EZ Flow Hydraulic Fluid Copyright© 2005 Douglas Dynamics, L.L.C. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film or other distribution and storage media, without the written consent of Fisher Engineering. Authorization to photocopy items for internal or personal use by Fisher Engineering outlets or snowplow owner is granted. Fisher Engineering reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifications used. Fisher Engineering and the vehicle manufacturer may require and/or recommend optional equipment for snow removal. Do not exceed vehicle ratings with a snowplow. Fisher Engineering offers a limited warranty for all snowplows and accessories. See separately printed page for this important information. The following are registered (®) or unregistered (™) trademarks of Douglas Dynamics, L.L.C.: EZ-V®, FISHER®, Minute Mount®, ProTube™, SnoFoil®. Lit. No. 28374, Rev. 01 Printed in U.S.A. October 1, 2005
