Download GE SPS Pumps spsntc Data Sheet

GE Oil & Gas
NTC
Close-Coupled Surface Pumping System
Compact design combined with lower upfront
costs and minimal maintenance help maximize
run time and minimize operating costs.
The GE Oil & Gas Surface Pumping Systems No Thrust Chamber
(NTC) model is the latest offering designed to meet the needs of an
ever evolving, high demand market. Featuring a design that
does not require a thrust chamber, the NTC has lower upfront cost
and reduced system complexity to improve reliability. With flow rates
ranging from 15 gpm to 300 gpm, the NTC can be configured for a
wide range of applications, with higher output pressure than many
alternative pump technologies. The NTC can also be configured
with Abrasion Resistant bearings to further protect the system and
increase run life.
Specifications
Flow Rate
15 – 300 US gpm
(514-10,285 BPD or 82-1635 m3/D)
Maximum Discharge
Pressure
2500 psi (172 bar)
(Application dependent rating)
Max Shaft Horsepower
(60Hz)
Up to 75 HP (56 kW)
Max Fluid Temperature
200°F (93°C)
Housing Metallurgy
Standard carbon steel
Corrosion resistant options
Stage Metallurgy
Ni-resist Type 1
Maximum Suction PSI
260 psi (18 bar) @ 200°F (93°C)
Typical System Lengths
6ft (1.8 m) - 21ft (6.4m)
GE imagination at work
GE Oil & Gas
Applications
•
•
•
•
•
4425 Westway Blvd
Houston, TX 77041 USA
713 260 6740
geoilandgas.com/sps
Crude oil boosting/ transfer
Jet pumping
Lean amine circulation
Mine dewatering
Pipeline boosting
Features
•
•
•
•
Process fluids transfer
Produced water disposal
Produced water injection
LACT
Benefits
• Low pump thrust eliminates need for thrust
chamber
• Designed to be compact
• Designed with rear pull-out seal
• Standard C-Face, foot mounted NEMA frame
motors
• Non pulsating flow
• Reduced maintenance, upfront costs, and less
mechanical parts for repairs
• Small footprint reduces site space requirement and
optimizes facility design
• Minimal downtime for mechanical seal
maintenance or replacements
• Motor easily replaced
Performance for SD & SE Series Pumps
2750
SD0013
2500
SD0019
SD0025
2250
Pressure (psi)
2000
SD0038
1750
1500
1250
SE0052
SE0080
1000
SD0052
SE0115
750
SE0125
500
SE0170
SE0230
250
5
10
20
30
40
50
60
70
80
Flow (US gpm)
GE imagination at work
Note: These values are for pumps running at 3570rpm at 1 SG.
90
100
200