Download GE EAMD Data Sheet

GE
Lighting
Evolve LED Area Light
™
Contemporary Domed (EAMD)
imagination at work
Product Features
The Evolve™ LED Contemporary Domed Area Light is a futuristic and aesthetically pleasing lighting system that offers
high uniformity, excellent vertical light distribution, reduced offsite visibility, reduced on-site glare and effective security
light levels with symmetric and asymmetric distributions. This new generation of area light combines the strength and
reliability of GE outdoor lighting solutions with advanced light control for improved efficiency.
The Evolve LED Contemporary Domed Area Light can yield up to a 60-percent reduction in system energy compared with
standard HID systems. This reliable system offers more than 11 years of service life to reduce maintenance frequency
and expense, based on a 50,000 hour life and 12 hours of operation per day. Containing no mercury or lead, this
environmentally responsible product is RoHS compliant.
Applications
Mounting
• For all applications in site, area, and general lighting requiring high uniformity, excellent vertical light distribution, reduced offsite visibility, reduced on-site glare and effective security light levels with symmetric and asymmetric distributions.
Option A
• 6-inch (152mm) mounting arm for 2-inch (51mm) tennon (single)
Housing
•
•
•
Domed die-cast aluminum housing.
Architectural design incorporates a high efficiency light engine directly into the unit ensuring maximum heat transfer, long LED life and a low Effective
Projected Area (EPA).
Meets 2G vibration standards per ANSI C136.31-2001. For 3G rating contact factory.
Option C
• Slipfitter mounting for 2-3/8” (60mm) O.D. pipe prewired with 24-inch (610mm) leads. Available
with a photoelectric sensor on the arm.
Finish
•
•
•
Corrosion resistant polyester powder painted, minimum 2.0 mil. thickness.
Standard colors: Black, Dark Bronze and Gray.
RAL & custom colors available.
LED & Optical Assembly
Electrical
• Structured LED array for optimized roadway, walkway
and campus photometric distribution.
• Evolve light engine consisting of nested concentric
directional reflectors designed to optimize application
efficiency and minimize glare.
• Utilizes high brightness LEDs, 65 CRI at 4100K or 5600K
typical.
• LM-79 tests and reports are performed in accordance
with IESNA standards.
• 120-277 volt and 347-480 volt available.
• System power factor is >90% and THD <20%.
• Class “A” Sound rating.
• Integral surge protection non-dimming:
- For 120-277VAC per IEEE/ANSI C62.41.-1991, 4kV/2kA Location Category B2 (120 Events)
- For 347-480VAC per IEEE/ANSI C62.41.-1991, 6kV/3kA Location Category B3 (120 Events)
• Integral surge protection GE dimming:
- For 120- 480VAC per IEEE/ANSI C62.41.2-2002, 6kV/3kA Location Category B (120 Events)
• EMI: Title 47 CFR Part 15 Class A
• Photo Electric Sensors (PE) available for all voltages.
Lumen Maintenance
• System rating is 50,000 hours at L85. Contact factory
for L rating (Lumen Depreciation) beyond 50,000 hours.
Ratings
Warranty
• UL/cUL listed, suitable for wet locations.
• IP 65 rated optical enclosure per ANSI C136.25-2009.
• Temperature rated at –40° to 45°C.
• 5-year limited system warranty standard.
Ordering Number Logic
Contemporary Domed (EAMD)
E
_ A
_M
_ D
_
PROD. ID
E= Evolve
A= Area
M= Medium
D= Dome Top
_
VOLTAGE
_L
_ _
__
OPTICAL
CODE
LED COLOR
TEMP
0 = 120 - 277
H= 347 - 480
1 =120*
2 =208*
3 =240*
4 =277*
5 =480*
D=347*
_
PE FUNCTION
LENS TYPE
41 = 4100K
56 = 5600K
MOUNTING ARM
COLOR
_
OPTIONS
D= Dimmable (0-10 Volt Input)*
F =Fusing
XXX = Special Options
*Contact factory for availability
options 2-5.
PE control not
available for 347480V. Must be
a discrete voltage.
voltage only if fuse
option is selected.
A3
_ _ _ _
A = 6” Arm for 2” Vert. BLCK = Black
L = Polycarbonate 1=None
Tennon (Single)
DKBZ = Dark Bronze
Optical Cover 2=PE Rec.
4 = PE Rec. with C = Ext Slipfitter for 2” Pipe* GRAY = Gray
Shorting Cap
5 = PE Rec. with *Slipfitter option must be Contact factory for
ordered for PE function
other colors.
Control
*Specify single
OPTICAL
CODE
_
TYPICAL INITIAL
LUMENS
TYPE
4100K
Asymmetric
5600K
TYPICAL SYSTEM
WATTAGE
120-277V
347-480V
POLE SPACING
(2-4 LANES)
BUG RATINGS
4100K
5600K
B
U
B
U
G
IES FILE NUMBER*
G
4100K
5600K
4800 5200
90
100
5:1
30 1 21 2454233 454234
A4
Asymmetric Forward
3100 3400
63
70
5:1
1
2
1
1
3
1
454232 454235
R5
Symmetric
4900 5400
90
100
5:1
2
1
2
3
0
1
454231 454236
See distribution illustration below
*Tested under thermally stable conditions at 25°C. Reference IES LM79 methods.
Photometrics
EAMD Type III - Asymmetric (A3)
5,200 Lumens, 5600K (GE454234.ies)
EAMD Type IV - Asymmetric Forward (A4)
3,400 Lumens, 5600K (GE454235.ies)
3014
2745
2260
2059
.1
1372
.2
686
.5
.2
Grid Distance in Units of
Mounting Height at 16’
Initial Footcandle Values at Grade
2
753
.5
Polar Trace Vertical and Horizontal Plane
through Horizontal Angle of Maximum
Candlepower
Grid Distance in Units of
Mounting Height at 16’
Initial Footcandle Values at Grade
EAMD Type V - Symmetric Round (R5)
5,400 Lumens, 5600K (GE454236.ies)
2181
1636
1091
545
.1
.2
.5
Grid Distance in Units of
Mounting Height at 16’
Initial Footcandle Values at Grade
2
1
1
.1
1507
2
1
Polar Trace Vertical and Horizontal Plane
through Horizontal Angle of Maximum
Candlepower
Polar Trace Vertical and Horizontal Plane
through Horizontal Angle of Maximum
Candlepower
Product Dimensions
6” Arm for 2” Vertical Tennon Mount (Option A)
Slipfitter Arm Mount (Option C)
28.3 in.
(720mm)
TOP VIEW
TOP VIEW
5.2 in.
2.9 in.
(131mm) (74mm)
22.0 in.
(558mm)
22.0 in.
(558mm)
28.6 in.
(725mm)
2 inch NOMINAL PIPE ONLY
(2.375 inch OD)
(60mm OD)
21.7 in.
(550mm)
12.1 in.
(306mm)
8.4 in.
(214mm)
23.9 in.
(608mm)
9.2 in.
(234mm)
2.3 in.
(57mm)
8.1 in.
(205mm)
95°
2.2 in.
(57mm)
3.9 in.
(100mm)
4X M6 SET SCREWS
4X M6 SET SCREWS
SIDE VIEW
SIDE VIEW
2 inch NOMINAL PIPE ONLY
(2.375 inch OD)
(60mm OD)
D ATA
2.8 in.
(70mm)
9.0 in.
(227mm)
• Approximate Net Weight: 24-31 lbs (11-14 kgs)
• Effective Projected Area (EPA) with Slipfitter: 1.5 sq ft max (0.14 sq m)
www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property
of their respective owners. Information provided is subject to change without notice. All values are design or typical
values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of
the General Electric Company. © 2014 GE.
OLP2856 (Rev 10/27/14)
9.0 in.
8.5 in.
(230mm)
(216mm)