Download GE 20 to 45 ft Specification Sheet
Transcript
Aluminum ROUND TAPERED AREA LIGHTING POLES 20 to 45 feet (6 to 14 meters) SUGGESTED LUMINAIRE APPLICATIONS PF1K hluf pf4s, pf4t DCD dsmf, dsmt, DSA p54S DCF vluf pf1s, PF1t DMY psfa DMS SPECIFICATION FEATURES • Round tapered seamless aluminum shaft • Satin ground finish • Shaft lengths from 20 to 45 feet • Single or multiple luminaire mounting • Two top tenon sizes • Plate mount for multiple-tenon bracket • Black and dark bronze finishes available Pole with Top Tenon Pole with Plate Top (Mounting 2T & 4T) Mount (Mounting PB) ORDERING NUMBER LOGIC (See Pole Selection Table for actual Ordering Numbers) A R T A PRODUCT IDENT (LUMINAIRE USAGE) X A = Area POLE CROSS SECTION X R = Round SHAFT SHAPE POLE MATERIAL 20 NOMINAL MOUNTING HEIGHT (FT) X X XX T = Tapered A = Aluminum 20= 20 25= 25 30= 30 35= 35 39= 39 45= 45 2T 6.0 MOUNTING SHAFT DIMENSIONS BOTTOM SHAFT WALL OD (IN.) THICKNESS (IN.) XXXX X 6.0 = 6.0 B = 0.188 7.0 = 7.0 C = 0.219 8.0 = 8.0 D = 0.250 10.0= 10.0 XX 2T=2-3/8 in. OD top tenon (See illustration above) 4T=4 in. OD top tenon (See illustration above) DB=Drill holes for mounting two Decashield® luminaires at 90°* DO = Drill holes for two Decashield NOTE: 45 luminaires at 180°* foot poles PB=Plate and bracket mounting have twofor multiple luminaires piece shafts (See illustration above) with flush Order bracket separately joint (field QD = Drill holes for four Decashield* drilled and SD=Drill holes for single Decashield* bolted) luminaire TB=Drill holes for three Decashield luminaires at 90°* TD=Drill holes for three Decashield luminaires at 120°* B *Requires pole vibration dampers NOTE:Order round pole mounting adapter separately. NOTE:These mountings can be used with any of the poles listed; substitute the correct mounting designation for XX in ordering number listed in Selection Table. NOTE: Drilling templates are the same for Decashield®, Dimension®, and DecasphereTM luminaires. P-6/2008 GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com 1-888- 6 9 - 4 3-5 3 3 SN E FINISH OPTIONS XX BL = Black DB=Dark bronze SN=Satin ground (Standard) X E = Electrical Festoon Box NOTE: If this option is required, add NOTE: if black or E to ordering dark bronze fin- number listed in Pole ish is required, Selection substitute BL Table. or DB for SN in ordering number listed in Selection Table Aluminum ROUND TAPERED AREA LIGHTING POLES 20 to 45 feet (6 to 14 meters) Pole Selection Table Shipped with pole: anchor bolts, anchor bolt covers, handhole cover, hardware, and anchor bolt circle template. Shaft cap included with poles drilled for Decashield ® luminaire mounting. Max Recommended Total Load Pole Base Effective Projected Area (sq ft) Shaft Dimensions Nominal Approximate Data Mounting Weight 80 90 100 Ordering Bottom OD X Top OD X Length X Thickness Weight Item Height (ft) (lbs) MPHI MPHI MPHI Number (in. X in. X ft-in. X in.) (lbs) Number 20 20 25 25 25 25 25 30 30 30 30 30 30 30 30 35 35 35 35 35 35 39 39 39 39 45 45 230 280 165 225 285 330 370 165 190 220 250 425 490 560 680 160 180 205 258 345 390 170 250 285 325 265 300 7.9 11.7 5.6 8.6 12.2 14.4 16.6 6.4 9.3 11.2 13.0 16.4 19.4 22.4 28.0 6.2 7.6 9.1 11.7 13.8 16.1 7.1 9.3 11.2 13.2 9.1 10.8 6.3 9.2 4.4 6.7 9.4 11.2 12.9 4.9 7.2 8.7 10.1 12.3 14.7 17.0 21.5 4.7 5.9 7.0 8.7 10.4 12.2 5.4 6.6 8.1 9.7 6.3 7.7 5.1 7.4 3.4 5.3 7.5 8.9 10.3 3.7 5.6 6.8 8.0 9.2 11.1 13.0 16.6 3.6 4.5 5.6 6.3 7.7 9.2 4.0 4.5 5.7 7.0 3.7 4.8 ARTA20XX6.0BSN 6.0 X 4.0 X 19-8 X 0.188 20xx7.0bsn 7.0 x 4.0 x 19-8 x 0.188 25XX6.0BSN 6.0 X 4.0 X 24-8 X 0.188 25XX7.0BSN 7.0 X 4.0 X 24-8 X 0.188 25XX8.0BSN 8.0 X 4.0 X 24-8 X 0.188 25XX8.0CSN 8.0 X 4.0 X 24-8 X 0.219 25XX8.0DSN 8.0 X 4.0 X 24-8 X 0.250 30XX7.0BSN 7.0 X 4.0 X 29-8 X 0.188 30XX8.0BSN 8.0 X 4.0 X 29-8 X 0.188 30XX8.0CSN 8.0 X 4.0 X 29-8 X 0.219 30XX8.0DSN 8.0 X 4.0 X 29-8 X 0.250 30XX10.0BSN 10.0 X 6.0 X 29-8 X 0.188 30XX10.0CSN 10.0 X 6.0 X 29-8 X 0.219 30XX10.0DSN 10.0 X 6.0 X 29-8 X 0.250 30XX10.0ESN 10.0 X 6.0 X 29-8 X 0.312 35XX8.0BSN 8.0 X 4.0 X 34-8 X 0.188 35XX8.0CSN 8.0 X 4.0 X 34-8 X 0.219 35XX8.0dSN 8.0 X 4.0 X 34-8 X 0.250 35XX10.0bSN 10.0 X 6.0 X 34-8 X 0.188 35XX10.0CSN 10.0 X 6.0 X 34-8 X 0.219 35XX10.0dSN 10.0 X 6.0 X 34-8 X 0.250 39XX8.0dSN 8.0 X 4.0 X 38-9 X 0.250 39XX10.0bSN 10.0 X 6.0 X 38-9 X 0.188 39XX10.0cSN 10.0 X 6.0 X 38-9 X 0.219 39XX10.0dSN 10.0 X 6.0 X 38-9 X 0.250 45XX10.0cSN 10.0 X 6.0 X 44-8 X 0.219 45XX10.0dSN 10.0 X 6.0 X 44-8 X 0.250 80 90 100 105 125 140 145 130 135 155 170 185 210 235 300 160 185 215 220 240 285 240 250 285 320 315 415 43 44 43 44 45 45 45 44 45 45 45 46 46 46 46 45 45 45 46 46 46 45 46 46 46 46 46 REFERENCES See Pole Accessories for Bracket Ordering Information See Area Accessories for Round Pole Mounting Adapter See Page P-20 for Option Information See Page P-21 for Pole Base Data See Page P-2 for Pole Selection Guidelines GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com 1-888- 6 9 - 4 3-5 3 3 2008/ P-7