Download GBC P300 User's Manual

SAFETY
MESSAGES
A
Yoursafetyas well as the safetyof others is importantto
GBC. In this OperatorManualand on the productare important safetymessages.Readthesemessagescarefully.
.Unplug the DocuBindP300beforemoving it, or when it is
not in usefor an extendedperiodof time.
A Thesafetyalert symbolprecedeseachsafetymessage
..in
this OperatorManual. This symbolindicatesa
potentialpersonalsafetyhazardthat could hurt you or others. as well as causeproductor propertydamage.
Thefollowingwarningis found on this unit:
This safetymessagemeansyou could be seriouslyhurt or
killedif you openthe productand exposeyourselfto hazardousvoltage
CAUTION:
IN CASEOFEMERGENCY,
USETHEPOWER
COROASA MAINOISCONNECT
DEVICE!
.Do not operatewith a damagedsupplycord or plug, after it
malfunctions,or after it has beendamagedin any manner.
.Do not overloadelectricaloutletsbeyondtheir capacityas
this can result in fire or electricalshock.
.Do not alter attachmentplug. Plugis configuredfor the
appropriateelectricalsupply
.The unit is intendedfor indoor use only.Never push objectsinto this productthroughcabinetslots.
Do not spill liquid of any kind on this product.
.Do not operateif the producthas beenexposedto rain or
water.
SERVICE
Thefollowingsymbolsappearon this product,and their
meaningis as follows:
Ef3PUNCH
PLJRESET
A
WARNING:Foryour protection,do not connectthe
DocuBindP300to electricalpoweruntil you readthese
instructionscompletely.Keeptheseinstructionsin a convenientlocationfor future reference.To guardagainstinjury,
the followingbasicsafetyprecautionsmust be observedin
the set-upand use of this product.
IMPORTANTSAFEGUARDS
GENERALSAFEGUARDS
.Use the DocuBindP300only for its intendedpurposeof
punchingand bindingpaperand coversaccordingto the
indicatedspecifications.
.Do not placeanythingin the punchopeningof the machine
otherthan paperand coverstock.
.Place unit on a secure,stablework areato preventthe
machinefalling and possiblycausingpersonalinjury and
damageto the unit.Follow all warningsand instructionsmarkedon the product.
.Lift the machinefrom the bottom,not the cover.
.Do not lift the machineby the coveror paperholderwire.
ELECTRICAL
SAFEGUARDS
TheDocuBindP300must be connectedto a supplyvoltage
corresponding
to the electricalratingof the machineas indicatedon the seriaVratingplateor in this manual
h
~
Do not attemptto serviceor repairthe DocuBindP300yourself. Unplugthe unit and contactan authorizedGBCservice
representative
for exchangeor repair.
CLEANING
A
CAUTION:Unplugthis productbeforecleaning.
Wipeexterioronly with a dampcloth. Do not use detergents
or solvents.
The following notesapply only to the units rated230V50Hz.
MAINCOROSET
SELECTION
(FOR230VACMACHINES
ONLY)
Whenchoosinga detachableline cord for use with the
DocuBindP300,alwaysobservethe following.
The cordsetconsistsof threecomponents;the attachment
plug, cordageand applianceinlet. Eachof thesecomponents
must meetEuropeanregulatoryapprovalsfor safety.
Thefollowingminimum electricalratingsfor the specific
cordsetare publishedfor safetypurposes.DONOTUSE
CORDSETS
THATDONOTMEETTHEFOLLOWING
MINIMUM
ELECTRICAL
REQUIREMENTS.
PLUG:3A, 250 volts, 50/60 Hz,Class1,3 conductor,
Europeansafetyagencyapproved.
CORDAGE:
TypeH05W-F3GO.75,
Harmonized
( <1 HAR1>-).
The"<1 1:>"symbolsindicatecordageapprovedto appropriateEuropeanstandard(NOTE:"HAR"may be substituted
by the approvalmarkof the Europeansafetyagencywhich
approvedthe cordage.An examplewould be" <1 VDE1>-".
APPLiANCE
CONNECTOR:
3A, 250 volts, 50/60 Hz,European
safetyapproved,TypeIEC320. Cordsetshall not exceed3
metersin length.Cordsetwith componentelectricalratings
greaterthan the minimumspec~iedelectricalratingsmay be
substituted.
CAUTION:
THEPOWER
RECEPTACLE
MUSTBELOCATED
NEARTHEEOUIPMENT
ANDBEEASILYACCESSIBLE.
3
Thankyou for purchasingthe GBCOocuBindP300.Thissystem
featuresournew exclusiveRadiafBinddesign. Thisdesign
enablesyou to assembleyour documentas youpunch.making
it easierto loadpaperontothe bindingcombthanprevious
systems!TheOocuBindP300advancedpunchingtechnology
alsomakesit easierto punchmorepaperat oncewhile
providinggreaterreliability.
A. GmlNG STARTED
1. Firmlypushthe femaleend of the powercord into the
powercord receptacle(A) locatedon the backof the
machine(seefigure 1).
h
~
CAUTION:
Makesure this step is completeprior to
pluggingthe male end ot the power cord into a power
receptacle.
2 Plugthe maleend of the powercord into an appropriate
powerreceptacle.
B. DETERMINE
SHEET
WIDTH
1. Set EdgeGuide(8) to papersizeyou wish to bind (11",
8-1/2" lettersize,11-1/4" oversizedcover,A4 ring, AS,
JapanA4) (seefigure 1). Whenusing oversizedcovers,set
the EdgeGuideon Covers,punchall of the coversfor your
job and set aside.Movethe EdgeGuidebackto the 11"
settingto punchyour contentsthen bind.
4. To punch,pressthe PUNCH~button (02). The OocuBind P300punchesup to 15 sheetsof 20 Ib./80gram
paperat once.Punchonly TWOclearcoversat a time to
preventjams and excessivewear.
5. If punchjams, depressthe RESET~button (03). Then
pressthe PUNCH~button (02) againand removepaper
or coversfrom punchthroat (it may be necessaryto punch
severaltimes in order to removethe paper).Repeatsteps 1
to 4 with slightly less paperto avoid punchjams on additionallifts.
E. BINDING
1. Placea PlasticCombBindingElementbehindthe Vertical
Comb(E) with the openportionof elementfacingyou (see
figure 3).
2. Rotatethe BindLeverup (E1)towardyou until the Comb
BindingElement(E2)openssufficientlyto insertyour
document(seefigure 4).
3. Threadfront coverfinished.sidefacing down (seefigure 5),
onto openBindingElementFingers(E3).Threadpages,
front facingdown, onto element. Repeatfor largedocumentsas required.Placethe backcover,finishedside
facing upwardon openBindingElementFingerslast.
4. Pushthe Bind Leverawayfrom you backto its original
positionto closethe bindingelement.
C. DETERMINE
PLASTIC
CDMBSIZE
1 Slidethe BinderSizeropen (C) (seefigure 1).
5. Removebook by lifting upward.Your presentationis
now complete!
2. PlacedocumentincludingcoversbehindBinderSizer.
6. Onceyou becomefamiliar with your DocuBindP300,
you will find that you can bind as you punch,increasing
your productivity.
3. Releasethe BinderSizerand selectthe comb binding
elementthat correspondswith the sizeshownby guide.
Onlycombsizesup to 1" (25 mm) are shown.Your
DocuBindcan bind documentsup to 425 sheets,or 2"
(50 mm) comb size.For best results,alwaysuse GBC
brandcoverswith GBCcolor-coordinatedbindingcombs.
D. PUNCHING
PAPER
(seefigure 2)
1 Lift the Wire PaperSuppor1(D) into place(optional).
2. Align sheetsor coversand inser1edgeto be boundinto
punchthroat (D1).
3. Jog the sheetsuntil they areflush againstthe edgeguide
andthe bottomof the punchthroat. Allow the paperto rest
againstthe Wire PaperSUppOr1.
or, you may
preferto holdthe sheetsin placewith one hand.
F. EMPTYCHIPDRAWER
1. EmptyChipDrawer(F) after repeateduse.Pull drawer
gentlytowardyou to open.Whenputting backin, the
drawerwill snapinto place(seefigure 6).
G. SERVICE
Should your DocuBind require service contact GBC at'
Quartet/GBC
5700 Old Orchard Road
Skokie, IL 60077 USA
1-800-541-0094
http://www.gbc.com/opd
SPECIFICATIONS
Dimensions'
18" (W) x 81/2" (H) x 16" (0)
457mmx 216mmx 406mm
Bind Capacity"
425 sheetsor 2"
Weight:
341bs.(15.2 kg.)
MaximumSheetWidth'
11.7" (297mmA4)
115VAC,60Hz,2.3 amps,130
watts or 230VAC,50Hz,
1.3 amps
Dis-engagable
Pins"
1 (A5 paper)within comb
storagebin
Electrical
Power'
Punch Capacity"
(50mm)
15 sheetsof 20 Ib. paper
15 sheetsof 80 glm2paper
5