1
Download Essick Air 10 DD User's Manual
Transcript
Champion Commercial Aspen Cooler Specifications Aspen Coolers Down Discharge Champion Cooler’s line of commercial evaporative coolers offers an economical & environmentally-friendly means of cooling and recirculating air in large facilities where refrigerated air systems would be cost prohibitive. Using no harmful chemicals & much less electricity than traditional air conditioning, evaporative coolers provide the energy efficient cooling alternative. Champion’s Aspen Coolers use a time-tested technology that has been shown to be exceptionally effective in hot, dry climates. MODEL NO. All steel components (except the blower wheel, shaft and pulley) are chemically treated and covered with an electrostatically applied polyester finish at a thickness of 1 to 1.5 mil to protect the cooler from scratches and corrosion. This finish meets or exceeds requirements for the following tests: BHP 3/4 75/85 DD Comment A 1 1 1/2 95 DD Comment A 2 3 1 10/12 DD Comment C 1 1/2 2 1 1/2 14/21 DD Comment C These American-made units are made of heavy duty steel and high qualty components. Your maintenance team will appreciate that repair is easily facilitated by the removable louver panels. 2 3 5 1 CD 11/16 Comment B 1 1/2 2 3 CD 21 Comment B 5 SPEED 110455 110456 110461 110457 110458 110462-9 110459-1 110463-9 1 2 1 1 2 1 1 1 110460-1 110464-9 110465-9 110457 110458 110462-9 110459-1 110463-9 PHASE 1 75/85 SD BHP 3/4 1 95 SD Comment A 10/12 SD 1 1/2 2 1 1 1/2 2 14/21 SD 1 1/2 Comment C 2 3 5 1 CS 11/16 Comment B 115/208-230 230 208-230/460 115/230 230 208-230/460 115/208-230 208-230/460 AMPS** SHAFT DIA. 5/8 5/8 5/8 5/8 5/8 7/8 5/8 7/8 7/8 7/8 1 1/8 5/8 5/8 7/8 5/8 7/8 BELT PART NO. 1 1 1 1 2 1 1 1 3 1 1 3 1 3 1 3 3 1 1 3 1 3 115/208-230 208-230/460 208-230/460 115/230 230 208-230/460 115/208-230 208-230/460 110460-1 110464-9 110459 110463-9 110460 110464-9 1 1 1 1 1 1 1 3 1 3 1 3 115/208-230 208-230/460 115/208-230 208-230/460 115/208-230 208-230/460 24/13.2-12 7.5-6.8/3.4 20/11-10 6.6-6/3 24/13.2-12 7.5-6.8/3.4 7/8 7/8 5/8 7/8 7/8 7/8 110231 110465-9 110466-9 110471 110458 110462-1 110459-2 110463-9 110460-1 110464-9 110465-9 1 1 2 2 1 2 1 1 1 1 3 3 1 1 3 1 3 1 3 3 208-230/460 208-230/460 115 230 208-230/460 208-230 208-230/460 115/208-230 208-230/460 208-230/460 10.6-9.6/4.8 16.7-15.2/7.6 16 8 4.6-4.2/2.1 11-10 6.6-6/3 24/13.2-12 7.5-6.8/3.4 10.6-9.6/4.8 1 1/8 1 1/8 110219 110219 5/8 70807 5/8 7/8 7/8 1 1/8 70807 582013 110466-9 1 3 Side Discharge MODEL NO. VOLTS 13.8/7.6-6.9 6.9 3.5-3.2/1.6 16/8 8 4.6-4.2/2.1 20/11-10 6.6-6/3 24/13.2-12 7.5-6.8/3.4 10.6-9.6/4.8 16/8 8 4.6-4.2/2.1 20/11-10 6.6-6/3 1 208-230/460 16.7-15.2/7.6 1 1/8 CFM INCHES STATIC PRESSURE MODEL NO. 110217 75/85 DD 110217 110217 110217 95 DD 110218 110231 110231 10/12 DD 110219 110219 582018 582017 14/21 DD CD 11/16 582142 Comments: A. Motor, Pulley & Pump sold separately. C. Motor, Pulley, Pump, Float & Bleed Off sold separately. B. Motor, Pulley, Belt & Pump sold separately. Comment C Champion Cooler certifies that the evaporative air coolers shown here are licensed to bear the AMCA Seal. The ratings shown are based on tests & procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the Certified Ratings Program. MOTOR PART NO. Down Discharge CD 21 Comment A Á1000-Hour Salt Spray Test ASTM B117 ÁAbrasion Reisistance Test ASTM 4060-84 ÁImpact Resistance test ASTM D2794 Á2400-Hour Immersion Test ASTM D870 ÁAdhesion Test ASTM D3359 Comments: A. Motor, Pulley & Pump sold separately. C. Motor, Pulley, Pump, Float & Bleed Off sold separately. B. Motor, Pulley, Belt(s) & Pump sold separately. 1 1/2 2 3 MOTOR SPEED PART NO. PHASE 1 110455 110456 110461 110457 110458 110462-9 110459-1 110463-9 1 2 1 1 2 1 1 1 110460-1 110464-9 110457 110458 110462-9 110459-1 110463-9 110460-1 110464-9 1 1 1 2 1 1 1 1 1 3 1 1 3 1 3 1 3 1 1 3 1 3 1 3 110459 110463-9 110460 110464-9 110465-9 110466-9 581028 581227 581028 581226 581156 110460-1 110464-9 110465-9 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 3 1 3 3 3 1 1 3 1 3 1 3 3 1 VOLTS AMPS** SHAFT DIA. BELT PART NO. 115/208-230 230 208-230/460 115/230 230 208-230/460 115/208-230 208-230/460 13.8/7.6-6.9 6.9 3.5-3.2/1.6 16/8 8 4.6-4.2/2.1 20/11-10 6.6-6/3 5/8 5/8 5/8 5/8 5/8 7/8 5/8 7/8 115/208-230 208-230/460 115/230 230 208-230/460 115/208-230 208-230/460 115/208-230 208-230/460 24/13.2-12 7.5-6.8/3.4 16/8 8 4.6-4.2/2.1 20/11-10 6.6-6/3 24/13.2-12 7.5-6.8/3.4 7/8 7/8 5/8 5/8 7/8 5/8 7/8 7/8 7/8 110217 115/208-230 208-230/460 115/208-230 208-230/460 208-230/460 208-230/460 115 230 208-230/460 208-230 208-230/460 115/208-230 208-230/460 208-230/460 20/11-10 6.6-6/3 24/13.2-12 7.5-6.8/3.4 10.6-9.6/4.8 16.7-15.2/7.6 16 8 4.6-4.2/2.1 11/10 6.6-6/3 24/13.22-12 7.5-6.8/3.4 10.6-9.6/4.8 5/8 7/8 7/8 7/8 1 1/8 1 1/8 110219 MODEL NO. 75/85 SD 110217 95 SD 110231 10/12 SD 110231 110231 110219 5/8 110219 110219 70807 5/8 7/8 7/8 70807 582013 582018 1 1/8 582019 **Amperage shown is from National Electric Code. Use amperage on motor nameplate to determine motor protector. Specify components in accordance with comments A, B, & C. 110308 110279-003 110279-003 110306-1 † 110302 † 110299 110279-003 110306-1 † 110302 † 1 10299 110299 110304 110300 110308 † 110309 110279-003 110306-1 † 110302 † 110299 110299 110286 † 110290 110290 110289 110291 110291 110304-1 583022 583022 110279-003 † 110302 583094 110304-1 Side Discharge 110217 110217 SHEAVE PART NO. 14/21 SD CS 11/16 SHEAVE PART NO. 0 0.1 0.2 0.3 CFM 6074 RPM 300 CFM 5806 RPM 314 CFM RPM 5479 330 6685 330 6449 342 6160 6685 330 6449 342 7653 378 7453 7653 378 8424 9642 416 477 0.4 0.5 0.6 0.7 441 441 441 441 473 524 524 CFM 4132 4132 4951 4951 4951 4951 6158 6158 6158 6158 7078 8493 8493 RPM 399 399 418 418 418 418 454 454 454 454 485 535 535 357 CFM 5144 5144 5854 RPM 348 348 373 CFM 4812 4812 5552 RPM 364 364 388 CFM 4482 4482 5255 RPM 381 381 403 6160 357 5854 373 5552 388 5255 403 388 7212 400 6949 414 7453 388 7212 400 6949 414 8247 9493 425 484 8035 9315 9315 436 493 493 7802 9121 9121 448 503 503 6683 6683 6683 6683 7560 8918 8918 428 428 428 428 460 513 513 6417 6417 6417 6417 7320 8706 8706 9225 246 8673 258 8215 274 7607 286 7098 300 6581 314 6038 330 10575 282 10004 293 9680 306 9213 318 10575 282 10004 293 9680 306 9213 318 8822 8822 8822 8822 329 329 329 329 8315 8315 8315 8315 342 342 342 342 7906 7906 7906 7906 354 354 354 354 11625 310 13245 214 11193 320 10793 12690 224 11955 331 236 10360 11121 342 9986 248 10415 354 260 9551 9789 364 272 9186 9032 376 285 14607 14106 255 12692 266 12093 278 12093 278 16711 270 16299 278 15726 285 15138 295 14557 306 19806 320 19481 327 19043 333 18606 340 18088 348 18088 348 8245 230 7600 249 7020 272 6235 276 5745 320 10555 265 10200 278 9660 291 9210 303 8800 318 11388 11388 13897 17544 17544 5245 8200 288 10728 298 288 10728 298 315 13379 325 357 16983 365 357 16983 365 338 4285 354 333 7380 344 9435 344 8785 378 370 10830 391 13155 521 236 11360 280 13270 326 17000 420 10925 12730 16600 245 292 332 435 13520 10360 12530 16100 306 342 450 10190 12000 15500 317 9820 356 465 11950 369 14700 480 329 11275 13600 355 0.8 CFM 3753 3753 4638 4638 4638 4638 5893 5893 5893 5893 6840 RPM 419 419 434 434 434 434 467 467 467 467 497 8283 7372 0.9 1.0 CFM RPM 495 5068 510 5357 6363 495 521 5068 6122 510 533 7864 567 7657 577 CFM RPM CFM RPM 3342 4299 4299 4299 4299 444 452 452 452 452 3935 473 3935 473 5629 481 5357 5629 6602 481 509 546 8071 556 366 6847 380 7372 366 6847 380 8755 8016 386 300 8386 398 7904 409 7434 423 10042 12821 310 334 9337 12246 323 343 8694 11583 339 353 11002 363 16558 3810 6650 374 366 355 16079 3240 6035 382 380 368 2055 4830 6670 389 392 380 15110 1355 4525 397 406 375 8510 364 7650 375 9925 285 6015 393 10645 12970 406 532 10440 423 12765 542 11935 11935 434 9815 445 553 11070 564 CFM INCHES STATIC PRESSURE 0 0.1 0.2 CFM 0.3 0.4 0.5 0.6 0.7 0.8 0.9 CFM RPM CFM RPM RPM CFM RPM CFM RPM CFM RPM CFM RPM CFM RPM CFM RPM 110308 110279-003 5905 317 5670 330 5405 342 5110 5110 355 355 4795 4795 369 369 4456 4456 385 385 4089 4089 403 403 3705 425 3302 451 110279-003 110306-1 † 110302 † 110299 110306-1 110299 110299 6498 349 6289 360 6054 372 5799 383 5523 395 5233 408 6498 349 6289 360 6054 372 5799 383 5523 395 5233 408 6868 420 6724 424 6572 429 6411 436 6246 443 6071 452 4922 4922 4922 4922 5885 422 422 422 422 463 4592 4592 4592 4592 5683 439 439 439 439 474 4245 4245 4245 4245 5464 458 458 458 458 487 6522 507 6345 517 1.0 CFM RPM 3882 480 3882 5227 CFM RPM 480 501 4965 516 6156 528 5952 540 7250 429 6753 445 7558 462 7429 466 7291 470 7148 475 7002 482 6850 489 6688 497 8567 261 8052 275 7595 287 7140 299 6659 313 6132 328 5557 346 9807 299 9347 311 8939 322 9807 299 9347 311 8939 322 399 350 354 354 354 354 379 6274 9994 7729 7729 7729 7729 8908 382 340 343 343 343 343 369 6805 10374 8144 8144 8144 8144 9269 367 329 332 332 332 332 360 7282 10794 8544 8544 8544 8544 9630 11713 237 11083 247 10451 257 9785 267 9067 279 6805 8130 8130 7427 382 401 401 311 399 414 414 226 367 390 390 294 6274 7704 7704 12386 7282 8522 8522 8284 13633 249 13016 259 12439 268 11868 11868 277 277 11281 11281 286 286 10674 10674 296 296 10025 10025 307 307 9313 320 8557 334 7758 351 110291 15606 285 15063 294 14551 302 14050 310 13553 318 13042 325 12522 334 11969 343 11390 353 10777 364 10133 376 110291 110304-1 583022 18502 338 235 346 17598 346 17598 257 6783 353 353 275 17167 17167 6063 360 360 289 16749 16749 5578 366 366 16334 367 5092 372 332 15906 4160 379 350 15478 3699 386 366 393 368 373 14581 1995 4700 400 385 387 14115 NR 4295 408 7966 18044 18044 7343 399 385 6290 398 5820 412 10120 417 9610 465 9545 435 110308 † 110309 110279-003 110306-1 †110302 †110299 110299 110307-1 110286 †110290 110290 110289 583022 10200 271 9725 283 9315 297 8920 308 8370 321 7650 337 7120 399 6520 360 15035 3146 5905 110279-003 †110302 10970 296 10470 303 10185 314 9710 327 9300 340 9000 354 8770 364 8315 376 7345 583094 12630 398 12330 351 11850 357 11535 366 11405 323 11180 384 10805 396 10415 407 Performance shown in the Performance Data Tables above is for type B - free inlet, ducted outlet. Power rating (BHP) does not include drive losses. Performance ratings do not include the effects of appurtenances in the airstream. † These sheaves have a 7/8 bore for use with motors with 7/8 shaft.
