Transcript
Splice Covers Weather-grade vinyl equipment for splice protection. Description CB Series The CB Series Connector Bundle Cover—is a re-enterable weather-grade vinyl splice cover accepted for use by the RUS. Serving as a zippered re-enterable dielectric shield, a CB series cover protects the splice against ultraviolet rays, dust, insects and other environmental factors. The covers are available in two sizes: CB34 (used in the UPCBD3 and the UPCBD4 series) and the CB5 (used in the UPCBD5 series). Mastic sealing tape, a reusable cable tie, and the connector bundle cover are included in the protector package. Ordering Information Catalog Number CB34 CB5 Part Number F601910 F601920 Description Splice protector for UPCBD3 and UPCBD4 series pedestals Splice protector for UPCBD5 series pedestals EmersonNetworkPower.com/EnergySystems (North America) EmersonNetworkPower.eu/EnergySystems (EMEA) © Emerson Network Power, Energy Systems, North America, Inc. 2014. Business-Critical Continuity™, Emerson Network Power™, the Emerson Network Power logo, Emerson™ and Consider it Solved are service marks and trademarks of Emerson Electric Co. EnergyMaster ™, eSure™, NetPerform™, NetReach™, NetSpan™, NetSure™ and NetXtend™ are trademarks of Emerson Network Power, Energy Systems, North America, Inc. Any other product, brand, or company names or logos are the property of the respective owner. While every precaution has been taken to ensure accuracy and completeness herein, Emerson Electric Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications subject to change without notice. 026900D-SpliceCvr / 0314