Transcript
Operation Remote Operation TV Mode To use the features described in this section, make sure you are in TV mode by pressing the TV Mode button. TV Remote programming is required. See C-4 for instructions. Note: If you have programmed the remote in Limited Mode (C-6), only the TV Power, Mute and Volume buttons will control your TV. Press this button for TV Mode Receiver Power & TV Power Input Switch between TV inputs Turn the TV on/off Volume TV Menu Control TV volume Access menu features available on some TVs Up/Down Arrow Buttons Mute Turn TV volume on or off Channel up/down on TV Recall Go back to last TV channel viewed Number Buttons Enter a desired channel number on TV Picture-In-Picture (PIP) Buttons Display PIP features on some TVs with PIP capabilities Note: Remote operation is different on DISH Network TVs. See your DISH Network TV User's Guide for proper operation. C-8