Transcript
DESCRIPTION Code: 8E4059 Just add 4 USB devices to your computer! Hub USB can manage up to 127 devices and has overcurrent protection on each port. It can operate with peripherals at 12Mbps and 1,5Mbps. It is powered by the USB port or through the external power supply, in the package, and it guarantees up to 500mA for each port. Each port has a current limiter that protects your computer, the hub and the connected peripherals from overcurrent damages. Hub USB is Plug & Play and is fully compliant with USB specifications. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. All other brands, products and trademarks are property of their respective owners. It can operate with Windows® and Macitnosh® operating systems. No driver or setup is required. Ports 1 upstream port (root port) for computer connection 4 downstream ports for peripherals connection 2 porte SCSI ad alta velocità per espansione fino a 6 unità. Functionalities Plug & Play Up to 127 devices supported Operating at 1,5Mbps and 12Mbps Power Supply Powered by the computer USB port (self-powered) or through external power supply Power supply: +5VDC, 500 mA for each port Led Indicators Powered by USB bus/by external power supply Downstream ports enabled Overcurrent protection Minimum requirements Windows® ME, 2000, 98 Mac®OS 8.6 or higher Software and Hardware USB supported and installed Conformity CE Mark For further information: [email protected] or http://www.digicom.it Hub USB 01.09.2004 NETWORKING Hub USB