Transcript
IVS1, IVS2, IVSR1, IVSR2 Power Pack 062805 8" (203mm) Round x 2" (51mm) High with back draft damper Mounting Holes (typ. all sides) Mounting Holes (typ. all sides) Electrical Access 21 1/4" (540mm) 22 5/8" (575mm) 1/1 8" (203mm) Round x 2" (51mm) High with back draft damper Electrical Access 33 1/4" (845mm) 6" (152mm) 11 1/16" (281mm) 34 1/2" (876mm) 12 1/4" (311mm) IVS/R1 overall dimensions (Isometric View) #, Equal Equal 6 1/8" (156mm) #, 12 1/4" (311mm) 11 1/16" (281mm) 12 1/4" (311mm) 6" (152mm) IVS/R2 overall dimensions (Isometric View) Equal PLANNING GUIDE 12 1/4" (311mm) CL CL CL 6 1/2" 6 1/2" (165mm) (165mm) Equal 6 1/8" (156mm) CL 8" Round Collars 34 /12" (876mm) 22 5/8" (575mm) 8" Round collar IVS/R1 overall dimensions IVS/R2 overall dimensions (Top View) (Top View) 10" Round NOTES: 12" (305mm) 1. 2. 21" (533mm) 3. An Internal Blower is included with IVS1/IVS2 models. Blower Ratings: 1200CFM for IVS2 and 600CFM for IVS1. Remote Blower is required for IVSR1/IVSR2 models. The ATD10 is sold seperately. 8" (203mm) ATD10 Overall dimensions (Isometric View) (For use with IVS/R2) Model No. Dedicated Circuit Required Maximum Duct Length 120VAC, 60Hz, 15A (Breaker) Maximum 60 Equivalent Straight Feet Total Connected Load IVS1 IVSR1 IVS2 Approximate Shipping Weight 25 lbs. IVSR2 Web: http://www.dacor.com Corporate Phone: 800-793-0093 1.4kW (12A) 21 lbs. 38 lbs. 29 lbs. 7.5 Specifications are subject to change without notice. See installation instructions for additional details. L65338 rev B