Transcript
Catalog # COMBOLIGHT® GALLERIA Series • CGSV - CGCV Type SIX (6) Light Vertical Suspended Grid Configuration “E” • Lamp Groups 1, 2 & 3 Line Voltage or Low Voltage for Remote Transformer Project Cable Mounting Detail (CGSV) 4.75" x 6.00" Junction Box Toggle Bolt Cable Locking Device 120 Volt Primary Leads CGCV Front View Aircraft Suspension Cable x 2 CGSV Cable Suspension x 2 or CGCV Stem Suspension x 2 Specify Length Stem Primary Leads in Mesh Cable Shield 2.5" Depth 1" Depth Integral Xfmr. 120V Models CGSV Mounting 4.63" Round J-Box Coverplate Power Cord Stem Mounting Detail (CGCV) Junction Box Junction Box Toggle Bolt 120 Volt Primary Leads Optional 12V Electronic Transformer (Low Voltage models only) Cable Locking Device Socket Wires from Lamp 120 Volt Primary Leads Primary Leads in Mesh Cable Shield Aircraft Suspension Cable GRID CONFIGURATION “E” Stem Suspension This sheet is for Grid Configuration “E”. To see other grid configurations, consult other ComboLight Galleria Series spec sheets. x2 DESCRIPTION: A vertically suspended, grid style multi-lamp fixture. Can be suspended with cable or .375” diameter pipe stem. IMPORTANT: USING THIS SPEC SHEET This fixture is dimensioned according to lamp type. Please select lamp from either Lamp Group 1, 2 or 3 and then refer to the appropriate dimensions of fixture as shown above. Lamp Group 1 31.65" Lamp Group 2 40.65" Lamp Group 3 44.85" CONSTRUCTION: All aluminum construction. Grid is made of .75” square aluminum tubing with .062” wall thickness. LAMP ASSEMBLY: Six lamps mounted in adjustable double gimbal lamp holders. Dual axis 90º x 90º locking adjustability. ELECTRICAL: Low voltage models are wired for use with remote transformers. For integral transformers, see spec sheets for model number CGSVI or CGCVI. For Metal Halide see spec sheets for models CGSVM or CGCVM. Dimmable. ALL RSA COMBOLIGHT PRODUCTS ARE MADE IN THE U.S.A. Standard lamp back cover for AR111 models hides lamp terminals and connections. 90º Lamp Group 1 5.90" Lamp Group 2 7.40" Lamp Group 3 8.10" 90º Adjustable double gimbal lamp holder accepts up to two optical accessories .75" Cat. # / Description Lamp Type Grid Configuration Finish Label: UL, CSA and New York Calendar CGSV - Vertical Cable Suspension E - Six Light This sheet represents a standard configuration. Custom configurations are available with Galleria fixtures. Consult RSA for details. CGCV - Vertical Stem Suspension Lamp Group 1 11 - MR16 12V 50W 12 - MR16 12V 75W 13 - AR70 12V 20W 14 - AR70 12V 50W 15 - PAR16 120V 16 - PAR20 120V Lamp Group 2 21 - PAR30 120V 22 - PAR36 12V 50W 23 - AR111 12V 35W 24 - AR111 12V 50W 25 - AR111 12V 75W 26 - AR111 12V 100W Lamp Group 3 31 - PAR38 120V Optional Accessories - Details on Other Side Baffle Snoots Louvers Lenses SPECIFY - ___ RSA LIGHTING ___ ® BK - Black WH - White S - Silver PC - Polished Chrome PT - Custom E ___ RSA LIGHTING LLC 9660 - 9700 TOPANGA CANYON BLVD. CHATSWORTH CA. 91311 TOLL FREE: 800-356-3030 • 818-349-3030 • FAX: 818-349-3031 • www.rsalighting.com ©2003 RSA Lighting LLC All Rights Reserved • Specifications subject to change without notice.