Transcript
PowerProTM & FreedomProTM Road Case Model HC-900 1. Case complies with the Air Transportation Assoc. Spec. # 300, Category 1 for shipping 2. Detachable carpet-lined top compartment stores laptop computers, mic & cables* 3. Spacious speaker compartment with 1” thick unicellular foam (2” on bottom) provides maximum shock absorption and safety from damage due to vibration* 4. Recessed 14-gauge steel and springloaded handles and latches 5. Rugged 14-gauge steel-encased casters won’t sheer off during shipping or use 6. 14-gauge steel trim and corners attached by split steel rivet construction driven with 25,000 lbs of force every 3” for durability 2 1 Protect your PA investment with this top-level quality case, which is rugged enough for storing your PA or shipping it to the next gig. “Project Intercept" Please contact us immediately if you experience any difficulties with your Road Case. Our “Project Intercept" customer service program will quickly repair or replace items under warranty. Simply contact us via phone or email [email protected]. Visit our website at www.califone.com to learn more about the complete line of Califone® audio products including: Portable and installed wireless public address systems, lecterns, headphones & headsets, wireless mic systems, group listening centers, multimedia players and computer peripheral products. We are proud of helping teachers enhance student understanding and achievements since 1947, with your satisfaction as our first priority. 6 3 5 4 *speaker and laptop not included Specifications Main Speaker Compartment Internal Dimensions 27”H x 15”W x 13”D large enough to accommodate one PA916-SD, PA916, PA916-PS, PA916-SP or PA616 speaker (Detachable) Upper Laptop / Mic / Cable Compartment Internal Dimensions 6”H x 17”W x 15”D Construction Full-length steel piano hinge supported with two 1.5” nylon web straps Exterior Case Trim This Road Case carries service support through authorized dealers nationwide and is covered by our warranty for 1 year. Storage Capacity Distributed by: Dolly Wheels 1/4” ACX plywood (highest grade) covered with rugged ABS plastic coating for durability Beefy 14-gauge steel with steel ball corners throughout. Aluminum edging and tongue-in-groove valance exceed ATA specs. 600 lbs. Exterior Dimensions Weight 43H” x 19”W x 17”D 50 lbs. Warranty 1 year including parts and labor Four steel-encased 3.5” x 1.25” Califone® International Inc. 800-722-0500 www.califone.com HC-900, January 2007
