Transcript
CDM 7 F l o o r-standing loudspeaker system Product Summary ● The CDM 7 is an imposing floorstander which not only makes the best of the real wood veneer finish, but also means extra volume. The 165mm Kevlar® mid/bass combined with the additional 165mm Cobex® low-frequency driver, delivers a bass response as tactile as the beautifully crafted cabinets themselves. Technical highlights ● B&W's Tweeter on top technology ensures that the sound remains focused and time-sensitive and that the stereo image is presented with unparalleled three dimensional accuracy. Kevlar®: B&W developed and patented the method of using Kevlar® for loudspeaker cones to reduce unwanted standing waves. DuPont originally created Kevlar® for use in bulletproof vests. Description 3-way 4th-order vented-box system Drive Units 1 x 25mm (1in) alloy dome - high frequency Power Handling 30 - 150W into 8 ohms on unclipped programme Dimensions 1 x 165mm (6.5in) kevlar® - Height: 950mm Width: 220mm Depth: 290mm bass/midrange Net Weight 1 x 165mm (6.5in) Cobex bass Finish 18.5kg Cabinet: Real Wod Veneers, Black Ash, Frequency Response 40Hz - 20kHz ± 3dB on reference axis Cherry, Red Ash Sensitivity Grille: Black Cloth 90dB spl (2.83V 1m) Nominal Impedance 8 ohms (minimum 4 ohms) B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged. www.bwspeakers.com
