Download Avaya BayRS Version 15.4.2.0 Release Notes

Release Notes for BayRS Version 15.4.2.0
Upgrading DVMRP Configurations
In BayRS Version 15.1.0.0 and later, the default values for two DVMRP timer
parameters have been changed to conform with the latest RFC for DVMRP
(draft-ietf-admire- dvmrp-v3-10). Table 1 lists the parameters with their old and
new default values.
Table 1.
DVMRP Parameter Defaults Changed
Parameter Name
Default Value (in seconds)
Version
15.1.0.0 and
later
Site Manager
BCC
Earlier Than
15.1.0.0
Garbage Timeout
unconfirmed-route-timeout
340
260
Route Expiration Timeout
route-expiration-timeout
200
140
DVMRP timers must be the same throughout the network. Therefore, if your
DVMRP network changes—for example, if you add a DVMRP router running
Version 15.1.0.0 (or later) to the network, or if you create a Version 15.1.0.0 (or
later) configuration file that contains DVMRP— make sure that the values for the
timer parameters match the ones already configured for the network as a whole.
Upgrading FireWall-1 Configurations
Complete the following steps only if you are upgrading FireWall-1* from a
BayRS version earlier than 13.20. If you are running Firewall-1 from BayRS
Version 13.20 or later, you do not have to complete these steps during your
upgrade to BayRS Version 15.4.2.0.
Note: Firewall-1 is not supported on the Passport* 2430 and Passport 5430
platforms.
1.
Familiarize yourself with the Bay Command Console (BCC*).
Starting with BayRS Version 13.20, FireWall-1 no longer supports Site
Manager as a configuration tool. You must use the BCC to manage and
configure FireWall-1. For basic information about using the BCC, see Using
the Bay Command Console (BCC).
308663-15.4.2.0 Rev 00
3