Download Audio-Technica Mouse ATW-RCS1 User's Manual

Transcript
ATW-RCS1
wireless microphones & system accessories
Remote Momentary-Mute/Cough Switch
Features
• Rugged metal case
• Heavy-duty pushbutton
• Audio muting with no audible clicks
• HRS type input and output connectors
• Stainless steel belt clip
Description
The ATW-RCS1 remote momentary mute/cough switch allows a wireless
user to momentarily mute their Audio-Technica wireless microphone
quickly and easily.
The ATW-RCS1 momentary-mute/cough switch is ideal for ministers,
public speakers and other wireless users who need the ability to
momentarily mute a wireless microphone remotely. It is designed to be
installed between a wireless microphone using an HRS-type connector
and its associated UniPak® body-pack wireless transmitter.
The ATW-RCS1 features a large momentary push-button switch. The
unit is supplied with a permanently attached 22" cable terminated with
an HRS-type connector that attaches to the input jack on a UniPak®
transmitter. Its all-metal construction and heavy-duty pushbutton are built
to withstand rugged use. A durable belt clip is provided for ease of wear.
Architect’s and Engineer’s Specifications
The remote momentary mute/cough switch shall enable a wireless
microphone user to mute their microphone momentarily. It shall be
designed to connect between a wireless microphone (lavalier or
headworn style) and its associated body-pack transmitter. The remote
momentary mute/cough switch shall incorporate a large momentarytype pushbutton switch that can be found easily when the device is
worn under clothing, costumes, or vestments. When pushed, this
switch shall activate an internal electronic mute circuit that will mute
the attached microphone quickly and silently with no pops or clicks
heard in the audio. The unit shall be housed in a ruggedly constructed
metal enclosure with an attached durable belt clip. A twenty-inch
(minimum) cable shall be permanently attached to the box for
connection to the associated wireless transmitter along with an HRStype connector for attaching a microphone. The unit shall be finished in
a low-reflective black paint.
The Audio-Technica AT W-RCS1 is specified.
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com 0001-0082-00