Download Atdec TH-3060-UFH User's Manual

TH-3060-UFL
TH-3060-UFH
TH-3060-UFL
TH-3060-UFL
Flat
Component Checklist
TH-3060-UFL
TH-3060-UFL
screen
wall
Component
Checklist
Component Checklist
Installation
Instructions
Installation
Instructions
Installation Instructions
Installation Instructions
Installation
Large-Medium TVInstructions
Articulated Arm
mount | Full
Motion height
adjustable
Installation
Large-Medium
TV Instructions
Articulated
Arm
Hardware
M6x16mm
Large-Medium TV
Articulated
Arm Arm
Large-Medium
TV
Articulated
Hardware
Display
Hardware
Bag
Component
Checklist
M6x16mm
Display
Mounting
Component
Checklist
Large-Medium
TV
Articulated
Arm
M6x25mm
Arm
Spanner
End Cap
Mount Checklist
Coach Screw (x4) Hardware
5mm/4mm
Screws
Bag
Component
M6x16mm
Coach
Screw
Top Cap (x2)
Screw
(x4) (x4)
M6x25mm
HardwareAllen Key
End Cap
M6x16mm
Hardware
Coach Screw (x4) 6mm/4mm
M8M8x16mm
x 16mm
(x4)
5mm/4mm
M6x25mm
M6x16mm
Mounting Bracket (x2)
Top Cap (x2)
ScrewAnchor
(x4) (x4)
End Cap Allen
Nylon
key
Coach
Screw
(x4)
5mm/4mm
Allen
Key
M8x16mm
M8
x
25mm
Top Cap (x2)
Screw (x4)
M8x25mm (x4)
Allen Key
M6x25mm
M8x16mm
M6x25mm
Washer
(x4) 5mm/4mm
End Cap(x4) Coach
Nylon Anchor
End Cap
Screw (x4)
Coach
ScrewWasher
(x4)
5mm/4mm
(x4)
Nut
Top Cap
(x2)(x4)
Screw
(x4)12mm
M6
x 16mm (x4)
M8x25mm
Top Cap (x2)M6 Nyloc
Screw
(x4)
Allen KeyDisplay
M8x25mm
M8x16mm
Mounting
Washer
Nylon
Anchor (x4) Nylon
Washer
Key(x4)
Anchor(x4)
(x4)Allen
M8x16mm
Mounting Bracket (x2)
Tools
Required:
M6
x 25mm (x4)
20mm
Washer
(x4)
M6
x
6mm
screw
(x4)
Screws
(x4
each)
Mounting Bracket (x2)
Display
Mounting
M8x25mm
• Power drill
Mounting
Multiwasher
(x4)
Tools
Required:
Nylon
Anchor (x4)(x4)Washer Display
Screws
(x4
each)
Tools
Required:
M8x25mm
• 5mm (0.2”) drill bit• Power drill
Multiwasher
(x4)
(x4 each)
Display
Mounting
Washer
(x4)Screws
Nylon
Anchor
(x4)
•
5mm
(0.2”)
•• Power
Tools
required:
Multiwasher
Tools
Required:
10mmdrill
(0.39”)
masonry
drill
bitdrill bit (x4)
Screws
(x4
each)
Wall plate
•
10mm
(0.39”) masonryMultiwasher
drill bit
Mount Locking
•driver
Power drill
•• 5mm
(0.2”)
drill
bit head
(x4)
Phillips
head
screw
Display Locking
Mounting
Philips
screwdriver
drill
bit
•
Phillips
headdrill
screw
driver - 5mm (0.2”) Display
•
5mm
(0.2”)
bit
Arm/Wall
Mount
•
10mm
(0.39”)
masonry
drill
bit
Block
(x2)
End
Cap
(x2)
Arm/Wall Mount
Tools
Required:
(x2)
Cap (x2)
cover (x2)
• 13mmEnd
(0.5”)
socket
or socket
shifter
•
13mm
wrench
cap (x2)Block
• wrench
10mm (0.5”)
(0.39”)
masonry
drill or
bit shifter
Screws
(x4
each)
Bracket (x2)Locking
Locking
• Phillips head
screwdrill
driver
drill
•- Power
Power
• Phillips head screw
driver - 10mm
Multiwasher
(x4) (0.39”) masonary drill bit
IMPORTANT
INFORMATION:
Arm/Wall Mount INFORMATION:
Block
(x2) Mount End
Cap (x2)Block•(x2)13mm End
Arm/Wall
Capsocket
(x2) •wrench
IMPORTANT
13mm (0.5”)
socket wrench or shifter
(0.5”)
or shifter
Mounting Bracket (x2)
Mounting Bracket (x2)
!
• 5mm (0.2”) drill bit
IMPORTANT - Install Telehook 3060 Large-Medium TV Articulated Arm per Installation Instructions.
• 10mm (0.39”) masonry drill bit
IMPORTANT
INFORMATION:
Locking
IMPORTANT
INFORMATION
IMPORTANT
INFORMATION:
! IMPORTANT
- Install Telehook
3060
Large-Medium
Articulated
per Installation Instructions.
! This product
supports
a maximum load ofTV
35kg
• (77lbs).
Phillips head Arm
screw driver
! IMPORTANT
- Install Telehook
Large-Medium
TV Articulated
per Installation Instructions.
Arm/Wall
Mounta maximum
Block
(x2)
Cap3060
(x2)configurations
• 13mm (0.5”)
wrench Arm
or
shifter
! This
product
supports
VESA End
mounting
hole
200mmsocket
wide x100mm
high
to 700mm wide x 500mm high.
This product
supports
load
of Flatscreen
35kg
(77lbs).
IMPORTANT
- Install
Telehook
3060
Large-Medium
TV
Articulated
Arm
per
Installation
Instructions.
!Telehook
This product
supports
a maximum
load
of 35kg
(77lbs).
IMPORTANT
- Install
wall
mount
as
per
Installation
Instructions
! The manufacturer accepts no responsibility for incorrect installation.
Thisproduct
product
supports
VESA
mounting
hole
configurations
200mm
wide
x100mm
high
to
700mm
wide
x
500mm
high.high.
IMPORTANT
INFORMATION:
!
This
product
supports
VESA
mounting
hole
configurations
200mm
wide
x100mm
high
to
700mm
wide x 500mm
This
supports
a
maximum
load
of
35kg
(77lbs).
This product supports a minimum load of 5kg (11lbs) and a maximum load of 25kg (55lbs)
!Step
The 1.
manufacturer
accepts
no responsibility
for incorrect installation.
Check
Components
Theproduct
manufacturer
accepts
no
responsibility
for
incorrect
installation.
This
supports
VESA
mounting
hole
configurations
200mm
wide
x100mm
high
to
700mm
wide
x
500mm
high.
This
product supports
VESA mounting
hole3060
configurations
from 200mm
x 200mm to Arm
400mm
400mm
! IMPORTANT
- Install
Telehook
Large-Medium
TV Articulated
perx Installation
Instructions.
have received
parts against the Component Checklist and Hardware above.
Step
1.youCheck
Components
The manufacturer
accepts
no responsibility
for
incorrect
installation.
The
Manufacturer
accepts
no
responsibility
forall
incorrect
installation.
! This
product
supports
aCheck
maximum
load
of
35kg
(77lbs).
Step 1. Check Components
Changing
position
of Arm
on Wallwide
Mount
Check2.
you
have received
all
parts against
the Component
Checklist
and Hardware
! This product supports Step
VESA
mounting
hole
configurations
200mm
x100mm
highabove.
to 700mm wide x 500mm high.
Step
1.
Check
Components
Use Phillipsthe
headComponent
screw driver
Use 5mm
Allen Key to
Step
1.!you
Check
Components
Check
have
received
all
parts
against
Checklist
and
Hardware
above.
Step
2.
Changing
position
of
Arm
on
Wall
Mount
The manufacturer acceptsto loosen
no responsibility
for incorrect installation.
and tighten.
loosen and tighten.
Use Phillips
screw driver Checklist
Use
5mm Allen Keyabove.
to
Four optional positions
Checkyou
youChanging
havereceived
receivedall
allparts
partsagainst
against
thehead
Component
and
Hardware
Check
have
the
Component
and
Hardware.
Step
2.
position
of Arm
on
WallChecklist
Mount
! !!
! !!
! !!
!!
to loosen and tighten.
loosen and tighten.
Step 1. Check Components
Use
Phillips
head
screw
driver
Use
5mm
Allen
Key
to
Step
2.
Changing
position
of
Arm
on
Wall
Mount
Step 2. Mounting Location
Four optional positions
Check you
have received all parts against
the Component
Checklist and Hardware above.
to loosen
tighten.
loosen
and
tighten.
Use
Phillipsand
head
screw driver
Use
5mm
Allen
Key to
Thistoproduct
has
a
feature
where
the
arm
will
automatically
lock
in
position
when
Four optional positions
loosen
and2.
tighten.
Step
Changing position ofloosen
Armand
ontighten.
Wall Mount
pushed up against the wall to the left. If this feature is to be used allow clearance
Four optional positions
Usedeciding
Phillips head
screw driver
Use 5mm Allen Key to
to the left when
the mounting
location.
to loosen and tighten.
loosen and tighten.
Four optional positions
Wall
Step 3. Install Arm/Wall Mount to the Wall
locked position
Masonry
Step 3.Wall
Install
Clearance
Masonry
End Wall
Cap
Screw
End Cap
Screw
Arm/Wall Mount to the Wall
Nylon Anchor
Washer
Nylon Anchor
Washer
Step 3. Install Arm/Wall Mount to the Wall
Step
3. Wall
Install Arm/Wall Mount to the Wall
Masonry
CapWall
Timber End
Stud
Drilled Hole
Drilled Hole
free movement
Timber Stud Wall
Screw
End Cap
Screw
OR
Washer
Drilled Hole
Washer
Drilled Hole
To
ORunlock, pull the chord down whilst
moving the arm away from the wall
Timber Stud Wall
Nylon AnchorEnd Cap
Masonry
Wall
Timber Stud
WallEnd Cap Coach Screw
Coach Screw
WALL
EndStep
Cap 3. Install
End Cap
Washer
Washer
Drilled
Hole
Drilled Hole
WALL
Arm/Wall
Mount
to
the
Wall
Step 3.
Install
Arm
to
the
wall
Nylon
Anchor
End Cap
End Cap
Screw
Screw
Coach
Screw
Coach
Screw
WALL
End Cap
End Cap - Drill Washer
- Drill four 10mm
Washer
four 5mm (0.2”) diameter holes,
58mm
(2.3”) deep.
Drilled(0.39”)
Hole diameter holes,
WALL
Drilled
Hole
OR58mm (2.3”) deep.
Masonry Wall
Timber- Stud
Wall
- Secure the mounting plate to the wall using the Coach Screw
Secure the
mounting plate to the wall using the Coach
Screw
and
Nylon(0.39”)
Anchors
supplied.
- Screws
Drill four
10mm
diameter
holes, 58mm (2.3”)
deep. Stud -wall
Masonary Wall
Timber
Screws
supplied.
Drill four
5mm (0.2”) diameter holes, 58mm (2.3”) deep.
Nylon
Anchor
OR
- Secure the mounting plate to the wall
using the Coach
-End
Secure
platetotoaccurately
the wall using
thethe
Coach
End Cap
Capthe
NOTE:
Usemounting
a stud
finder
locate
centre Hole
WasherScrews and Nylon Anchors
Washer
Drilled
Hole
Drilled
supplied.
Screws
supplied.
of the stud. Ensure that all screws fix securely into stud.
Drilled hole
Screw
Screw
Drilled
NOTE: Use a stud finder to accurately locate the centre hole
OR
of the stud. Ensure that all screws fix securely into stud.
Wall
End Cap
Coach Screw
End Cap Coach Screw
Coach Screw
WALL
Nylon
Anchor
WALL
- Drill four 10mm (0.39”) diameter holes, 58mm
(2.3”)
deep.
End Cap
End Cap
Coach Screw
Coach Screw
Coach Screw
WALL
WALL
- Drill four 5mm (0.2”) diameter holes, 58mm (2.3”) deep.
- Secure theEnd
mounting
plate to the wall using the Coach
Cap
Cap plate to the wall using the Coach
- Secure the End
mounting
- Drill
four
10mm
(0.39”)
diameter
holes,
58mm
(2.3”)
deep.
Drill
foursupplied.
5mm (0.2”) diameter
holes, 58mm
(2.3”) deep.
Coach Screw
Coach Screw
WALL
Washer
Screws and Nylon Anchors
supplied. Washer
Screws
WALL
- Secure the mounting plate to the wall using the Coach
- Secure the mounting plate to the wall using the Coach
NOTE:supplied.
Use a stud finder to accurately locate the centre
Screws and Nylon Anchors supplied.
Screws
Using
a 5mm
drill
bit,
Drill
three
holes
, 60mm
four (0.39”)
10mm (0.39”)
diameter
holes,
(2.3”) deep. of- the
- Drill
four(0.2”)
5mm
(0.2”)
diameter
holes,
58mm
(2.3”)(2.4”)
deep.
stud.
Ensure
that all
screws
fix securely
into
stud.
- Using-aDrill
10mm
masonary
drill bit,
Drill58mm
four holes,
NOTE:
Use
a stud
finder
to accurately
locate
theusing
centre
- Secure the mounting plate to the wall using the Coach
deep.
Secure
the
mounting
plate
to
the
wall
the
Coach
60mm (2.4”)
deep.
of the stud.Screws
Ensuresupplied.
that all screws fix securely into stud.
Screws and Nylon Anchors supplied.
- Secure the mounting
plate to the wall using the Coach
- Secure the mounting plate to the wall using the Coach
Use a stud finder to accurately locate the centre
Screws NOTE:
supplied.
Screws and Nylon Anchors supplied.
theastud.
all screws locate
fix securely
into stud.
NOTE:ofUse
studEnsure
finder that
to accurately
the centre
of the stud. Ensure that all screws fix securely into stud.
Step 5. Attach Display Mount to Arm
Step 4. Attach Wall Plate Covers
Threaded stud
Washer
PUSH
Mount
Step 6. Horizontal Rotation Adjustment
B. This will
allow 10°
Horizontal
rotation
adjustment
5°
M6 Nyloc Nut
(tighten firmly)
Step 7. Attach Screw Covers
5°
x2
A. From the
tightened position
undo each nut a
quarter of a turn two
times
PUSH
Note: The nuts can be re-tightened to
secure the display in position or left to allow
future changes
Step 8. Attach Mounting Rails To Display
The Mounting rails support VESA hole
configurations from 200mm x 200mm to
400mm x 400mm
Only insert the M6 x 6mm screws in
the mounting rail attached to the top of
the display. Tighten fully then undo one
half turn
Display mounting screw
Mounting rail
Step 9. Attach Display to Display Mount
A. Prior to attaching your Display check which of the three pairs
of keyhole mounting positions on the Display Mount to use that
will also allow access to the lower mounting slots.
B. Hook the screws in the top mounting
bracket into your chosen
pair of keyhole
mounting
positions on the
display mount
C. Attach M6 x 6mm screws
to the lower mounting rail, to
secure the display
keyholes
screws
Step 10. Display Height Adjustment
A. The Arm may need to be adjusted to
suit the weight of the display
More tension for
heavier displays
If the Display drops down the spring
tension will need to be increased
B. To adjust the tension use
the supplied 6mm Allen Key
less tension for
lighter displays
Wall
If the Display rises the spring tension
will need to be decreased
Step 11. Tilt Adjustment
loosen the nuts on both sides
of the tilt mount
13°
Tighten nuts to secure position
Wall
Turn left nut
Anti-clockwise
Nuts
Turn right nut
Clockwise
Adjust the Display to the
desired viewing angle
Turn left nut
Clockwise
Nuts
Turn right nut
Anti-clockwise
Installation complete
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to the continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 07.09.12 ©