Transcript
Snap-In Filter Helps Keep Leaves and Debris Out of Gutters. • • • • • • Install in seconds by snapping on to front edge of gutter. Handy 3 foot sections fit standard “K” style aluminum, steel or plastic gutters. Made of high quality, rigid PVC. Snap-In design will not collapse under debris. 50 guards needed for average home. Available in white or brown (Fits 4”, 5” & 6” Gutters). Installation Simple. Gutter guards are installed on rain gutters to help prevent leaves, twigs and other debris from falling into the gutters and clogging both the gutters and downspouts. Obstructed gutters and downspouts will prevent rain water and melting snow from flowing through the gutter system. Water that cannot flow freely can back-up and overflow the gutter causing damage to the landscaping and the foundation. Damage to the roof line and the fascia board may also occur if water gets behind the gutter. See the full line of Amerimax rain carrying products at a home center, hardware store or wholesale distributor near you. www.amerimax.com 800-347-2586 Simply slides under the shingles and hooks to the front edge of the gutter. No special tools required. 5.14.08
