Transcript
FloWise® 1.28 ELONGATED TOILET VITREOUS CHINA FloWise ® 1.28 ELONGATED high efficiency TOILET ❑ 2073.014 •Vitreous china •Meets definition for HET (High Efficiency Toilet) – 20% less water usage than 1.6 gpf •High efficiency (4.8 Lpf/1.28 gpf) • EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface •4" non-adjustable, piston action Accelerator™ flush valve •Elongated siphon action jetted bowl •2-1/8" fully-glazed trapway •Speed Connect ® tank/bowl coupling system •Chrome-plated trip lever •Sanitary Dam on bowl •100% factory flush tested •2 bolt caps • 10 year warranty FINISHED WALL 19mm ± 6mm (3/4 ± 1/4) 222mm (8-3/4) ❑ 3018.013 Elongated Bowl ❑ 4023.014 Tank Nominal Dimensions: 762 x 438 x 794mm (30" x 17-1/4" x 31-1/4") To Be Specified: ❏ Color: ❏ White ❏ Seat: (please specify color) ❏ Slow Close Elongated #5325.010 ❏ Rise & Shine Elongated #5324.019 ❏ EverClean ® Elongated Seat with Slow Close Snap-Off Hinges #5321.110 ❏ Supply with stop: 438mm (17-1/4) 470mm (18-1/2) C/L C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS) SUPPLY AS REQ'D 83mm (3-1/4) Fixture only, seat and supply by others Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions • Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability • Certified in EPA WaterSense HET program • Qualifies in LEEDS Programs 762mm (30) 381mm (15) 16mm (5/8) 254mm (10) 305mm (12) 203mm (8) 114mm (4-1/2) 343mm (13-1/2) FINISHED FLOOR 794mm (31-1/4) 356mm (14) 267mm (10-1/2) C/L OF OUTLET NOTES: THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. * DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Certified by IAPMO R&T © 2008 AS America Inc. K39 Revised 2/08
