Transcript
CAMBRIDGE RECESS WHIRLPOOL MODEL NUMBERS 2460.028 2460.128 AIR ACTUATOR CAP/BODY DISCHARGE TEE AIR SWITCH SYSTEM I PUMP (See Section J) O-RING AIR CONTROL VALVE JET BODY ASSEMBLY 1/2" RIGID PVC TUBING (NOTE 1) 2461.028 2461.128 PUMP DISCHARGE COUPLING AIR ACTUATOR TUBE PUMP SUCTION COUPLING P/O MOTOR AIR CONTROL VALVE AIR CONTROL VALVE HOUSING AND NUT ESCUTCHEON ASSEMBLY PUMP BRACKET O-RING 1" RIGID PVC TUBING JET NOZZLE ASSEMBLY 1-1/2" RIGID PVC TUBING SAFETY SUCTION DEVICE SUCTION GUARD NOTE LEFT-HAND UNIT SHOWN RIGHT-HAND UNIT OPPOSITE SUCTION FITTING DESCRIPTION Pump Suction Coupling O-Ring Pump Discharge Coupling Air Control Valve (Metal) Air Control Valve (Plastic) NOTE 1 Air Control Valve Housing/Nut Jet Nozzle Assembly Escutcheon Assembly Jet Body Assembly Suction Guard Suction Fitting Suction Fitting Elbow Discharge Tee Pump w/Air Switch (1 HP) Air Switch Safety Suction Device Air Actuator Cap/Body Air Actuator Tubing Pump Bracket SUCTION FITTING ELBOW PART NUMBER PKG QTY 047186-0070A 047187-0070A 047186-0070A 068916-YYY0A 751676-XXX0A 068917-XXX0A 047587-XXX0A 047588-XXX0A 047589-0070A 047463-XXX0A 047181-XXX0A 751186-0070A 047438-0070A 752444-0070A See Section J 752399-0070A 752439-XXX0A 047602-0070A 047638-0070A 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 FT. 1 NOTE 1: Schedule 40 Rigid PVC Piping available through local plumbing supply outfits. See Section "J" for Additional Parts and Accessories. Removal/installation requires tool part no. 047530-0070A. Removal/installation requires tool part no. 047605-0070A. Product names listed herein are trademarks of American Standard Inc. C American Standard Inc. 1999 Replace XXX with Fixture Color Code, YYY with Trim Finish Code; see page VII H-49 Rev. A
