Transcript
Safe Solder Fume Extractors Model 40 User manual & filter change directions ! Unit set up IMPORTANT WARNING Before opening unit for any reason UNPLUG the cord set from the power supply Unpack unit and inspect. Plug the unit into a 115V 15AMP power supply Turn the unit on with the switch on the side of .the unit. The unit is ready for use Replacing or cleaning the pre-filter Unplug the unit from the power The first filter nearest the intake is a pre-filter Simply lift pre-filter and remove. Insert new pre-filter and slide back into the unit. Replacing the carbon filter Unplug the unit from the power Simply lift the carbon filterand remove. Insert new carbon filter and slide back into the unit. Filter and fuse change diagram CARBON FILTER CARBON FILTER PREFILTER Replacement parts Pre-filter - S2FP0412 Carbon filter - S2SF0500 Unit wiring diagram SWITCH blk/brn 115V, 60 Hz wht M MOTOR 115V, 0.4A green A lle rA ir_ MK : Ma nua ls /S a fe s olde r 40 Ma rc h 2007 C a l l u s AllerAir 1 - 8 Industries 8 8 - 8 5Inc 2 -8247 www.allerair.net