Transcript
SBX-ISDVFP Stainless Steel Surface Mount Box -INSTRUCTIONS- The SBX-ISDVFP is an 18-Gauge stainless steel enclosure designed for surface mounting the IS-SS/DVF prox and iCLASS reader door stations. Compatible with the IS-DVF-HID, IS-DVF-HID-I, IS-SS-HID, IS-SS-HID-I, and IS-IP4DVF CONTENTS: - SBX-ISDVFP surface mount box - #15 Torx Security 1/4” Hex bit - Qty 4. 8/32 x 1” Torx Security Screws - Qyt 4. 8/32 Speed Nuts MOUNTING INSTRUCTIONS: Mounting Tabs 1. The SBX-ISDVFP is designed to mount to a 1 or 2-gang box, ring, or to any flat surface. 2. Pass cable through the knockout hole. 3. Secure mounting box to wall. 4. Connect wires to IS door station. (Refer to system’s installation instructions). IS-DVF-HID 5. Connect supplied speed nuts to mounting tabs. (4 total) 6. Attach door station to mounting box using the tamper proof screws and tool supplied with this box. SPECIFICATIONS: Mounting: 1 or 2-gang box, or surface mount directly to wall Material: 18-Gauge Stainless Steel Color:Polished Stainless Steel Dimensions (HxWxD): 12-7/16” x 7-1/16” x 2-13/16” (top); 1-13/16” (bottom) Interior depth: 1-5/8” Aiphone Corporation 1700 130th AVE NE Bellevue, WA 98005 (425) 455-0510 Fax: (425) 455-0071 TOLL FREE TECHNICAL SUPPORT: (800) 692-0200 E-MAIL: [email protected] SBX-ISDVFP Instr. 0613JD
