Transcript
Handset Sub with Off-hook Calling, 25V Speaker, and AI-CP170 board - INSTRUCTIONS The AI-HS100 is a handset sub station used in conjunction with the AI-CP170 Interface board and a 25V speaker as a remote station on the AI-900 system. The handset offers off-hook ringing to the master station, two-way communication, and muting the overhead speaker when picked up. Use this confuguration in areas where open voice and handset remote stations are needed. WIRING DIAGRAM: 8 Connector on AI-900RS Card SP-2570N Speaker with 25V Transformer Gray to Common of Transformer AI-CP170 4 terminal to 1.25W Tap on Transformer VI Violet G *Important, When connector is plugged into AI-900RS, Orange should be on top BK Black RD Red VI Violet OG Orange BR Brown *Top View of Connector GY Gray Remove Jumper See Note OPERATION: 1. When the master station calls the remote speaker/handset station, audio communication will be through the speaker. 2. If the handset is picked up during communication, audio will be routed through the handset and will not be heard through the speaker. 3. To place a call, simply pick up the handset and wait for a reply from the master station. 4. To conclude the call, hang up the handset. 4 3 2 1 L L AI-HS100 Note: If using AI-HS100 without a speaker leave the jumper between pins 3 and 4 installed. If using the AI-HS100 with a speaker remove the brass jumper. SPECIFICATIONS: See specifications contained in standard product literature. Aiphone Communication Systems 1700 130th Ave. N.E. Bellevue, WA 98005 (425) 455-0510 FAX (425) 455-0071 TOLL FREE TECHNICAL SUPPORT: (800) 692-0200 E-MAIL: [email protected] AH-HS100 Instr. 0309JDJS